Hydraulic Submersible Slurry Pump

Hydraulic Submersible Slurry Pump
Product Introduction:
A Hydraulic Submersible Slurry Pump combines a hydraulic drive with a pumping assembly designed for operation beneath the liquid surface. For a submerged-duty proposal, selection must address where the equipment will sit, what surrounds it during operation and how it will be recovered for inspection. A flow figure cannot answer those questions.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of hydraulic submersible slurry pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk hydraulic submersible slurry pump for sale here from our factory. Also, pricelist is available.

 

Introduction | Specify the Underwater Duty Before Deployment

 

A Hydraulic Submersible Slurry Pump combines a hydraulic drive with a pumping assembly designed for operation beneath the liquid surface. For a submerged-duty proposal, selection must address where the equipment will sit, what surrounds it during operation and how it will be recovered for inspection. A flow figure cannot answer those questions.
WJY configuration status: the supplied spreadsheet documents hydraulic slurry-pump parameters but does not confirm submersible construction for the listed models. The WJY references below are therefore candidates for assessment, not verified underwater-rated products. Obtain manufacturer confirmation before treating any candidate as suitable for immersion.
Use this selection to develop a site-specific inquiry for a sump, sediment basin or comparable wet working area. Define normal and changing liquid levels, the intended equipment position and the material to be moved. An acceptable proposal should address access for servicing as carefully as pumping performance.

product-800-800

 

Hydraulic Submersible Slurry Pump Specifications / Technical Parameters / Technical Data

 

*The outlet entry column has no stated measurement unit. Its numbers are reproduced without a unit conversion or an assumed connection size. Obtain a dimensioned outlet drawing before specifying mating equipment.


Distinguish Head from Submergence
The head column describes a pumping parameter. It gives no permissible underwater depth, minimum liquid cover or exposure duration. Likewise, the flow column concerns the pumped mixture, not the hydraulic fluid feeding a motor. Cubic metres per hour are shown as m3/h; r/min expresses revolutions per minute.

product-800-800

 

Product Details | Follow the Equipment from Placement to Recovery

 

A Hydraulic Submersible Slurry Pump should be evaluated as a complete working arrangement, not just an item placed in a pool. The hydraulic motor converts fluid energy to rotation; its design and required supply must be documented for the chosen assembly. For WJY equipment, the available numeric sheet does not identify the motor type, pump internals or underwater sealing system.
Placement
Describe the intended position relative to the liquid surface and accumulated material. Include restrictions on access and any changes in liquid level during the job. Ask the manufacturer to identify the approved mounting and handling provisions rather than assuming that a suspension point or carrier attachment is included.
Material Entry and Discharge
Characterize the material that can reach the inlet, including settled solids and incidental debris. Slurry properties can affect wear and performance; the Hydraulic Institute also notes that some mixtures settle within piping. Review the proposed discharge route using actual mixture data, not a claim that every particle will pass because the outlet appears large.
Recovery and Inspection
Provide a practical description of how equipment will be withdrawn, accessed and inspected after shutdown. Confirm the required service space and handling documentation with the supplier. Neither an integral agitator nor a cutting attachment is demonstrated by the spreadsheet, so excavation or mixing functions must not be assumed.

product-800-800

 

Features / Equipment Characteristics | Separate Proven Data from Site Benefits

 

The five entries provide identifiable WJY choices for a Hydraulic Submersible Slurry Pump inquiry once underwater suitability has been addressed. Their confirmed characteristics are deliberately limited to the fields that can be checked.
A lower-capacity reference: WJY50-20 retains its 50 m3/h flow entry with 20 m head, giving a distinct alternative to the larger entries without implying a smaller physical envelope.
Intermediate alternatives: WJY150-25 and WJY300-25 remain separate choices even though their head entries coincide. Their power sources and installation dimensions still require individual review.
A head-focused comparison: WJY500-40 has the highest tabulated head within this five-model subset. That observation does not establish the greatest immersion depth.
A capacity-focused comparison: WJY800-22 has the highest tabulated flow within this subset. It is not presented as the maximum-capacity model in the full technical parameter table.
Our Advantages | Make Service Access Part of the Buying Decision
For submerged work, a useful product proposal addresses how the equipment will be reached when inspection is needed. Ask for that requirement alongside performance, rather than discovering an access problem after installation. This is a purchasing priority, not a claim of a built-in retrieval feature.
The comparison here supports explicit selection boundaries: documented model values remain visible, while underwater configuration, serviceability and material suitability are reviewed separately. Claims of maintenance-free operation, exceptional abrasion life or universally leak-free performance would require evidence not supplied with these records.

product-800-800

 

Production Process | Define the Submerged-Duty Build Record

 

Before accepting a Hydraulic Submersible Slurry Pump manufacturing proposal, establish which design features make the assembly appropriate for the intended exposure. A hydraulic drive label does not document that construction. The checkpoints below are proposed procurement requirements, not verified descriptions of a particular factory.
Design definition: request the drawing and component schedule identifying the parts exposed to the process liquid. The approved design should state the intended environment and distinguish immersion-related requirements from pumping performance.
Component preparation: identify the manufacturing and inspection records needed for those components. Material sourcing, shaping, machining and treatment details must follow the actual design. The spreadsheet cannot substantiate an alloy specification or a manufacturing method.
Assembly control: agree how the build will be checked against its drawings and how component changes will be recorded. If a seal or motor is substituted, require the supplier to explain the effect on the accepted application.
Quality Assurance | Match Evidence to the Claim
A flow/head record and an immersion-suitability statement answer different questions. Define the evidence needed for each before accepting the equipment. Where testing is required, specify the procedure, conditions, acceptance limits and identification of the tested assembly in the purchase agreement.
Request the relevant results and operating limitations with the supplied unit. No test pressure, immersion duration, certification mark or inspection outcome is asserted here. Shipment should not be treated as proof that an undocumented submerged-duty requirement has been verified.
product-800-800

 

Application | Describe What Changes During the Job

 

product-800-313

 

These Hydraulic Submersible Slurry Pump application examples are assessment scenarios, not customer case histories or approved WJY duties. They highlight conditions that an underwater proposal would need to address.

Avoid selecting only from the name of the industry. Two sumps can present different duties if their liquids, solids or operating arrangements differ. Hydraulic Institute guidance explains why mixture composition matters, while its viscosity reference describes another influence on rotodynamic pump behaviour. These sources provide background, not model-specific approvals.

 

Experience and Markets | Compare Operating Conditions, Not Photographs

 

For buyers considering a Hydraulic Submersible Slurry Pump, a relevant reference should show what happened under conditions comparable to the proposed job. A photograph of equipment near water does not establish that the equipment operated submerged, nor does it demonstrate acceptable performance over a maintenance interval.
Ask for a case description that distinguishes initial commissioning observations from later operating records. Useful context includes the liquid involved, the material handled, equipment placement and how inspections were performed. Any performance or durability statement should be tied to the configuration and conditions being described.
product-800-344

 

Our Service | Request Support for the Whole Working Cycle

 

Organize the service discussion around placement, operation and removal of the proposed equipment. For a Hydraulic Submersible Slurry Pump inquiry, the following items can be requested for quotation; supply and availability must be confirmed rather than assumed.
Site review inputs: submit a sketch of the wet working area, anticipated liquid levels, material description and access restrictions. Identify the proposed recovery method as an engineering question if it has not yet been designed.
Equipment documentation: request the information that links the quoted assembly to its allowable environment, hydraulic requirements and permitted handling arrangements.
Operator information: define the instruction language, required training topics and responsibilities for explaining operating restrictions.
Inspection planning: ask how exposed components are identified, what records should be retained and which replacement items are relevant to the accepted configuration.
Issue escalation: agree what information the supplier needs when performance changes or a component requires attention, including model identification and observed conditions.
A quoted support package should distinguish documentary assistance from field attendance. Freight, consumables, replacement components, warranty provisions and response arrangements require commercial agreement; they are not automatically included by listing a pump model.

product-800-534

 

Installation, Maintenance and Precautions | Keep Access and Isolation Planned

 

Do not lower a WJY unit into service on the strength of this page. First obtain written confirmation that its actual assembly is suitable for the intended immersion and follow the equipment instructions. The following points guide planning; they are not a step-by-step operating procedure.
Before placement: have the responsible personnel review handling provisions, support conditions and the proposed routes for hydraulic and discharge lines. Resolve whether the equipment can be installed and recovered within the site's approved arrangements. Do not improvise an attachment from an unverified feature.
While operating: use the manufacturer's specified limits and monitoring instructions. Keep observations associated with the actual liquid level, material and operating condition so a change can be investigated meaningfully. Do not respond to reduced delivery by applying undocumented speed or pressure settings.
Before servicing: follow the site's isolation and stored-energy control procedures. Inspection or access must be performed by competent personnel using the equipment manual and the authorized handling plan. Immersion does not remove mechanical or hydraulic hazards.
When restarting: confirm that any component replacement or installation change remains within the accepted configuration. Obtain the applicable restart instructions rather than relying on previous operation as evidence of safety.
For a Hydraulic Submersible Slurry Pump, neither dry running nor operation outside the documented liquid-level conditions should be presumed permissible. Maintenance intervals, allowable wear and fluid-care requirements remain matters for the manufacturer to specify.
product-800-506

 

FAQ

 

Q1. Does the spreadsheet prove that these WJY models are submersible?

No. It records model identifiers and pumping parameters without documenting underwater suitability. The title describes the requested application category. A manufacturer-approved configuration and its immersion conditions are needed before any listed WJY reference can be represented as an approved submersible unit.

Q2. Can the head value be read as an allowable immersion depth?

It cannot. Head concerns the pumping duty; allowable immersion concerns the equipment's approved exposure. The latter is not stated anywhere in the specification table. No depth rating is derived from a model's head entry on this page.

Q3. Are these all models in this selection?

Q4. What liquid and solids information matters for submerged assessment?
Describe the carrier liquid, temperature, solids characteristics and concentration, including any expected variation. Mention incidental debris as well as the normal process material. The manufacturer must assess the actual mixture; immersion alone does not establish particle passage or chemical compatibility.

Q5. Is an agitator included to disturb settled sediment?

No such inclusion is evidenced by the spreadsheet. If the job requires agitation or cutting, identify the function explicitly and request a documented proposal. A pumping capacity entry does not prove that the equipment can loosen compacted material before transport.

Q6. Can the listed capacity specify the hydraulic supply?

No. The capacity describes pumped-fluid volume, whereas the motor needs its own hydraulic specification. Obtain the required oil supply and circuit information for the actual assembly. No oil-flow value, working pressure or power requirement is calculated from the supplied columns.

Q7. What should be checked before purchasing the discharge connection?

Confirm the outlet measurement unit and approved mating dimensions. The source's unlabelled caliber figures do not establish a flange standard, pressure classification or hose specification. Use the confirmed drawing to select the connection rather than applying a familiar size convention.

Q8. What should accompany a Hydraulic Submersible Slurry Pump request?

Attach the proposed working-area layout, required pumping duty, mixture description and hydraulic-source information. State the intended submerged arrangement and how maintenance access will be provided. Ask the supplier to separate confirmed suitability from questions that still need resolution.

 

news-800-798

 

Hot Tags: hydraulic submersible slurry pump, China hydraulic submersible slurry pump manufacturers, suppliers, factory

Send Inquiry