Hydraulic Mining Slurry Pump

Hydraulic Mining Slurry Pump
Product Introduction:
A Hydraulic Mining Slurry Pump is evaluated for mining duties where water carries ore fines, tailings, mineral concentrate, crushed rock residue or settled solids. The selection process should begin with the actual stream and its route through the plant, not with a model name alone. A mine pit sump, flotation tailings line, thickener underflow connection and wash-water recovery point may all contain solids, but their material behavior can be very different.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of hydraulic mining slurry pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk hydraulic mining slurry pump for sale here from our factory. Also, pricelist is available.

 

Introduction | Define the Mining Stream Before Selecting the Pump

 

A Hydraulic Mining Slurry Pump is evaluated for mining duties where water carries ore fines, tailings, mineral concentrate, crushed rock residue or settled solids. The selection process should begin with the actual stream and its route through the plant, not with a model name alone. A mine pit sump, flotation tailings line, thickener underflow connection and wash-water recovery point may all contain solids, but their material behavior can be very different.
Before requesting a mining-duty quotation, provide the mineral type, solids concentration, particle size range, liquid chemistry, required duty point, line profile, operating hours and available hydraulic supply. These facts determine whether a listed Hydraulic Mining Slurry Pump can be assessed for a particular project.

product-800-800

 

Hydraulic Mining Slurry Pump Specifications / Technical Parameters / Technical Data

 

Read the Mining Data Correctly
Capacity is stated in m3/h and total head in metres. These are model-line reference values, not ore throughput, dry tonnes per hour, particle-passage limits, material-life figures or hydraulic oil requirements. The visible technical parameter table repeats 1450 r/min in every record, but does not describe a permitted speed range or control arrangement.
For mining slurry, a capacity figure must be read with the mineral stream. Tailings density, concentrate behavior, gangue particle shape, water chemistry and pipe elevation can all influence the final selection. Use this table to build a candidate list, then obtain a supplier-confirmed curve and construction data.
Technical Data to Confirm Before Order
The technical parameter table does not include wet-end materials, impeller geometry, lining, seal construction, bearing details, particle-size limit, solids concentration, slurry density, pH range, hydraulic motor displacement, oil flow, oil pressure, power, efficiency, dimensions, weight, certifications, mining approvals or warranty terms. Do not infer these items from the product title.

product-800-800

 

Mine-sump model matrix

Parameter

WJY50-20

WJY80-20

WJY120-18

WJY150-25

WJY200-40

outlet entry*

80

80

100

100

100

Capacity (m3/h)

50

80

120

150

200

Total head (m)

20

20

18

25

40

Rotating speed (r/min)

1450

1450

1450

1450

1450

 

Plant-transfer model matrix

Parameter

WJY260-28

WJY300-20

WJY300-25

WJY350-25

WJY400-20

Capacity (m3/h)

260

300

300

350

400

Total head (m)

28

20

25

25

20

Rotating speed (r/min)

1450

1450

1450

1450

1450

outlet entry*

150

150

150

150

200

 

Tailings-transfer model matrix

Parameter

WJY450-25

WJY450-30

WJY500-40

WJY600-20

WJY600-30

Total head (m)

25

30

40

20

30

outlet entry*

200

200

200

250

250

Capacity (m3/h)

450

450

500

600

600

Rotating speed (r/min)

1450

1450

1450

1450

1450

 

Large mining-circuit model matrix

Parameter

WJY700-20

WJY700-25

WJY800-22

WJY1000-18

WJY1000-20

Rotating speed (r/min)

1450

1450

1450

1450

1450

Capacity (m3/h)

700

700

800

1000

1000

outlet entry*

250

250

300

300

350

Total head (m)

20

25

22

18

20

*"outlet entry" uses the column named "Outlet caliber." The technical parameter table does not define a unit, pipe standard, hose size, flange class or connection drawing for this field.

 

Product Details | Link the Pump to the Mining Circuit

 

A Hydraulic Mining Slurry Pump sits within a mining circuit, not in isolation. Its duty may be connected to pit dewatering with solids, wash plant recovery, cyclone-feed support, tailings movement, concentrate transfer or cleanup of settled mineral fines. The process location changes the information required for selection.
the WJY technical parameter table identifies pump-side values only. It does not state the mineralogy, process temperature, chemical exposure or the relationship between pump and hydraulic power source. The hydraulic motor, hoses, power unit, controls and discharge equipment therefore need their own confirmation before an offer is finalized.
General slurry references describe how solids characteristics and viscosity influence pump-system behavior. These sources support the selection framework only; they do not verify any WJY material, capacity guarantee or mining approval.

product-800-800

 

Features / Equipment Characteristics | Compare Mining Duty Options Without Guessing Construction

 

The WJY range allows a mining buyer to compare reference duty levels while keeping the main mining questions visible.
Lower-volume models provide starting points for localized sump transfer, sample-related streams or smaller mineral-fines duties.
Middle-range models offer several flow/head combinations for process-water solids, wash plant discharge or internal transfer review.
Higher-volume models may be relevant to larger tailings or recovery routes, subject to confirmed density and construction.
Paired capacities such as 300 m3/h, 450 m3/h, 600 m3/h and 700 m3/h have different head entries, so model choice must retain the complete model line.
The 1000 m3/h entries show 18 m and 20 m head respectively; neither value confirms mining wear resistance.
Our Advantages | Engineering-Focused Selection
The page makes the WJY data visible without turning unprovided details into claims. That gives engineers, purchasing teams and distributors a clear line between the specification-table values and project-specific decisions still needed.
A mining supplier discussion is more useful when the buyer can compare all model rows, identify a target duty point and list the unknown construction requirements in the same inquiry. This avoids unsupported statements about abrasion resistance, material grade, mine-site approval or operating life.

product-800-800

 

Production Process and Quality Assurance | Tie the Build to the Confirmed Mining Duty

 

A mining slurry order should move through controlled confirmation stages rather than rely on a general product description.
Process definition: record the mining stream, particle profile, solids loading, liquid chemistry, required capacity, required head, pipe route and planned operating schedule.
Configuration approval: confirm the selected WJY model, wet-end specification, seals, motor interface, connections, instrumentation and supply boundary. The technical parameter table does not define these items.
Manufacturing records: request material, machining, assembly or purchased-component documents only for the actual contracted configuration. Do not treat generic factory wording as evidence for a mining application.
Inspection plan: establish the inspection points, acceptance criteria, functional checks, packing requirements and document package before release.
Quality Assurance: certificates, test scope, traceability and warranty must be confirmed in the commercial and technical agreement. A published parameter row is not a mine-site qualification or performance guarantee.
product-800-800

 

Application | Mining Slurry Conditions to Evaluate

 

A Hydraulic Mining Slurry Pump can be considered for mining operations involving mineral fines, water-bearing ore residue, tailings, concentrate slurry, screen wash water or settled solids. Application suitability remains dependent on the actual material and approved configuration.
The same model should not be assumed suitable for every mining slurry. The stream must be described in engineering terms before selection is approved.
product-800-636

 

Experience and Markets | Ask for Comparable Mining Evidence

 

Mining references are meaningful only when they identify a comparable stream and confirmed equipment configuration. A useful reference should state the mineral material, process point, operating hours, selected construction and evidence of inspection or service performance.
For international projects, review the manual, drawings, spare-parts list, packing method, inspection records, warranty text and after-sales contact process before issuing an order.

product-800-304

 

Our Service | Submit a Mining Duty Data Pack

 

A focused data pack helps the supplier review a WJY model without treating the mining application as a standard-water duty.
Process material: mineral type, particle-size range, concentration, density if known and liquid chemistry.
Hydraulic duty: capacity requirement, head requirement, line length, elevation change, suction arrangement and daily running time.
Drive interface: hydraulic oil flow, pressure, carrier machine or power-unit information.
Construction review: wet-end material, liner, seal, motor, hose, coupling and connection requirements.
Commercial scope: pump-only, pump-and-motor, hydraulic package, controls, spares, documents, inspection or packing needs.
This approach gives the supplier enough information to distinguish confirmed WJY parameters from optional mining configuration items.
product-800-506

 

Installation, Maintenance and Precautions | Prepare for Mineral Solids Management

 

Installation must follow approved supplier drawings and site safety procedures. This product page is not a commissioning instruction.
Before start-up, check the hydraulic source, suction condition, discharge route and pipe supports against the confirmed design. Where mineral solids settle during downtime, agree the flushing, restart and cleaning method before operation.
During service, monitor delivered flow, vibration, leakage, hydraulic temperature, noise and signs of solids accumulation. A change in the mining stream can change load and wear behavior without any change to the nameplate model.
For maintenance planning, define the inspection schedule, component identification, spare-part list, wear limits and isolation responsibilities. Do not permit dry running, blocked discharge, reverse operation, oversized solids, unapproved chemical exposure or uncontrolled temperature without supplier authorization.
product-800-652

 

FAQ | Practical Checks for Mining Projects

 

Q1. Which numbers on this page come directly from the technical parameter table?

The displayed model codes, outlet entries, capacity values, total-head values and speed references are listed in the listed WJY listed model records. Mining suitability is a separate technical decision.

Q2. Why are the models presented in four matrices?

The matrices make it easier to compare groups of five models while still showing all 20 technical parameter table entries. Each matrix preserves the original numbers for its listed models.

Q3. Does a capacity value represent tonnes of ore per hour?

No. The table reports liquid-mixture capacity in m3/h. Mineral tonnage requires confirmed density and solids data, which the technical parameter table does not provide.

Q4. What does the 40 m head figure identify?

The WJY200-40 and WJY500-40 rows each list 40 m as total head. This is a table reference, not a statement about wear life, material grade or plant pressure limit.

Q5. Why do two 1000 m3/h models remain separate?

WJY1000-18 and WJY1000-20 have the same listed capacity but different head entries. Their connections and project configuration still need independent confirmation.

Q6. Can a buyer select pipework from the outlet number?

Not until a supplier drawing is issued. The technical parameter table uses the term "Outlet caliber" without defining the unit or connection standard.

Q7. What is the minimum technical package for a quote review?

Send the mineral stream description, particle range, expected solids loading, requested duty, routing sketch, hydraulic supply details and scope of supply.

Q8. Does the page claim mine approvals or compliance certification?

No. The technical parameter table contains no mine approval, certification or regulatory document. Any project requirement must be supported by supplier-issued evidence.

 

news-800-798

 

 

Hot Tags: hydraulic mining slurry pump, China hydraulic mining slurry pump manufacturers, suppliers, factory

Send Inquiry