Horizontal Inline Centrifugal Pump

Horizontal Inline Centrifugal Pump
Product Introduction:
A horizontal inline centrifugal pump is a single-stage, single-suction, close-coupled centrifugal pumping machine designed with a horizontally oriented electric motor and precision in-line hydraulic nozzles positioned along a continuous horizontal axis. Engineered to combine the spatial linearity of an in-line pipeline component with the mechanical stability of a low center-of-gravity horizontal drive axis, the horizontal inline centrifugal pump addresses specialized plant-room challenges where overhead vertical clearance is strictly constrained or where structural vibration isolation requires a low, rigid foundation footprint.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of horizontal inline centrifugal pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk horizontal inline centrifugal pump for sale here from our factory. Also, pricelist is available.

 

Introduction: Restricted Vertical Headroom, Center-of-Gravity Dynamics & In-Line Pumping Evolution

 

In industrial processing structures, offshore deck modules, marine machinery flats, and subterranean utility tunnels, vertical ceiling clearance is frequently severely constrained. While vertical in-line pumps excel in saving floor acreage, their upright motor posture creates major installation headaches when ductwork, electrical cable trays, or low structural concrete beams hang barely two meters off the finished floor. In these restricted spaces, attempting to mount a tall vertical electric motor leaves zero overhead clearance for lifting eyes, chain falls, or crane hooks. If a motor burns out or a seal fails, maintenance crews are forced to unbolt the entire machine from the pipeline just to get working room.

This physical clearance dilemma is precisely why mechanical plant designers turn to the Horizontal Inline Centrifugal Pump. Engineered as a specialized member of the in-line fluid machinery family, this unit preserves the beloved straight-through piping geometry where suction and discharge nozzles align on an identical horizontal centerline at 180 degrees. However, instead of extending the drive motor vertically toward the ceiling, the electric motor and rotating drive assembly project horizontally along the axis of floor space. The entire machine profile hugs the floor, staying well below overhead piping headers while retaining full in-line piping convenience.

From a structural dynamics viewpoint, the horizontal motor layout offers distinct mechanical benefits. In earthquake-prone zones, marine applications, or skid-mounted containerized water treatment packages subject to mobile vibration, high vertical centers of gravity generate large overturning moments. A Horizontal Inline Centrifugal Pump keeps its mass low to the ground. The motor rests firmly on an integrated support bracket, spreading dynamic loads horizontally across floor channels rather than cantilevered upward. Bearing loads remain purely radial, avoiding the continuous axial thrust preloading that vertical motor thrust bearings must withstand when supporting heavy vertical rotor assemblies.

Fluid dynamics through the volute retain high hydraulic conversion efficiency. Clean water enters through the inlet nozzle, passes through an engineered guide contour, enters the suction eye of an enclosed radial impeller, and exits smoothly through the expanding discharge passage on the opposite side. Operating near its Rated Optimal Efficiency Point (BEP), this configuration combines the low overhead profile of a traditional horizontal machine with the straight-pipe routing simplicity of an in-line design, providing an ideal hybrid solution for restricted-headroom mechanical spaces.

product-800-800

 

Features & Equipment Characteristics: Mechanical Architecture of the Horizontal In-Line Configuration

 

Examining the mechanical layout of our Horizontal Inline Centrifugal Pump reveals how careful casting design and thoughtful motor mounting solve practical field challenges in tight mechanical rooms.

product-800-800

Inline Center-to-Center Port Geometry: Opposing flanged nozzles share identical pitch circles and face angles along an unbroken horizontal plane. Piping specialists can erect continuous spool lines without deviating through ninety-degree elbow drops, eliminating localized vortex friction and trimming down overall flange connection points.

 

Low-Profile Horizontal Drive Laydown: Arranging the driver horizontally behind the hydraulic casing halves the total vertical height footprint compared with vertical executions. Mechanical engineers can route piping skids right under low mezzanines, modular shelter roofs, or crowded overhead cable runs without clearance collisions.

 

Slide-Rail Horizontal Back-Pullout Design: Crews can inspect impellers and renew shaft seals without cracking a single pipeline flange bolt. Once casing studs are backed off, the motor, intermediate bracket, and rotating cluster pull straight back horizontally along floor guide rails, leaving the volute undisturbed in the line.

 

Dual-Point Base Stabilization & Casing Footing: An integral casting pad beneath the volute pairs with an adjustable rear motor frame foot to anchor the entire machine assembly. This balanced two-point foundation splits static equipment weight cleanly, isolating delicate pipework flanges from overhung bending stresses.

 

Close-Coupled Direct Drive Spindle: Eliminating external spider couplings and extended intermediate bearing pedestals reduces drive length. Torque flows directly from the motor rotor into the impeller hub across a rigid stainless shaft extension, preventing coupling fatigue and eliminating misalignment chatter.

 

Integral Stuffing Box Drainage Sump: Drilled instrument ports on both nozzle necks accommodate direct pressure gauges. Meanwhile, an open cavity under the seal face funnels minor run-in weeping into a clean drain collection point, preventing wash water from reaching motor electrical windings.

 

Specifications & Operating Parameters: Industrial ISW Horizontal Duty Matrix

 

Selecting low-headroom pumping equipment requires verified duty numbers. Our Horizontal Inline Centrifugal Pump range covers standard nominal connection sizes from DN50 to DN150, engineered for clean, neutral water and non-abrasive hydronic circulation. Heavy-section cast iron casings provide PN16 pressure containment, safely withstanding continuous working pressures up to sixteen bar. Standard operating temperatures span from sub-zero winter hydronic conditions up to +105°C, extendable to +120°C for pressurized hot water heating circuits.

Table 1 displays authentic performance ratings from our certified plant testing archives. The data records model codes, nominal flange diameters, rated design delivery rates, developed total heads, hydraulic efficiencies, motor speeds, electric power ratings, Net Positive Suction Head limits (NPSHr), and total dry unit masses.

product-800-800

Table 1: Certified Duty Ratings for Industrial Horizontal Inline Centrifugal Pump Models

Model Code

Bore Diameter

Design Discharge

Dynamic Head

Hydraulic Eff.

Drive Speed

Motor Rating

NPSHr Limit

Unit Mass

ISW-50-160

DN50

12.5 m³/h

32.0 m

55 %

2900 r/min

3.0 kW

2.0 m

55 kg

ISW-65-160A

DN65

23.3 m³/h

28.0 m

63 %

2900 r/min

4.0 kW

2.5 m

76 kg

ISW-65-160

DN65

25.0 m³/h

32.0 m

64 %

2900 r/min

5.5 kW

2.5 m

82 kg

ISW-80-160A

DN80

46.7 m³/h

28.0 m

67 %

2900 r/min

7.5 kW

2.8 m

118 kg

ISW-80-160

DN80

50.0 m³/h

32.0 m

68 %

2900 r/min

7.5 kW

2.8 m

118 kg

ISW-100-160A

DN100

93.3 m³/h

28.0 m

75 %

2900 r/min

11.0 kW

3.5 m

172 kg

ISW-100-160

DN100

100.0 m³/h

32.0 m

76 %

2900 r/min

15.0 kW

3.5 m

185 kg

ISW-125-200

DN125

160.0 m³/h

50.0 m

78 %

2900 r/min

37.0 kW

4.5 m

360 kg

ISW-150-200A

DN150

186.7 m³/h

43.5 m

78 %

2900 r/min

37.0 kW

4.5 m

390 kg

ISW-150-200

DN150

200.0 m³/h

50.0 m

79 %

2900 r/min

45.0 kW

4.5 m

425 kg

 

These operational figures illustrate the robust performance capacity packed into a low-profile footprint. In branch hydronic heating loops and compact chiller headers, the ISW-50-160 and ISW-65-160 units deliver crisp head pressures from 28 to 32 meters using economical 3.0 kW to 5.5 kW motors. As facility flow requirements increase in industrial plant cooling headers or regional transfer stations, the ISW-100-160 and ISW-125-200 move 100 to 160 cubic meters per hour, with hydraulic efficiencies reaching 76% to 78%. For heavy industrial water distribution, the ISW-150-200 delivers 200 m³/h at 50 meters head while reaching a peak efficiency of 79%, ensuring low continuous electricity consumption over decades of service.

 

Production Process: Casting Integrity, Machining Alignment & Rotor Balancing Workflow

 

Building a precision horizontal in-line pump requires strict discipline across foundry moldmaking, stress-relief heat treatment, and synchronized multi-axis metal cutting.

product-800-800

Precision Furan Pattern Tooling & In-Ladle Chemistry Checks: Volutes and horizontal motor stools are molded using chemical-bonded furan sand tooling, preserving crisp hydraulic dimensions and dense grain walls without sand washouts. Prior to tapping each melt, spark emission spectrometers check carbon and silicon levels, verifying metallurgical soundness before iron reaches the pouring floor.

 

Furnace Stress-Relieving Soak to Guard Against Flange Warp: Freshly poured castings undergo an extended normalization soak inside digitally monitored heat-treating ovens. Slow temperature ramping followed by gradual furnace cooling relieves internal casting strains, guaranteeing that finished mounting feet and gasket faces remain dead flat under severe bolt torque.

 

Single-Indexing CNC Tooling Centers for Flange & Register Boring: Casing bodies are locked into multi-axis CNC machine centers in one clamping operation. Synchronized cutters machine the intake nozzle, discharge nozzle, internal wear ring land, and motor pilot spigot in a continuous cycle, holding perpendicularity between the horizontal drive shaft and pipe axis within twenty microns.

 

Hard-Bearing Dynamic Balancing of Finished Impellers: Every cast impeller undergoes dynamic balancing on computerized hard-bearing rigs in accordance with ISO 1940 Grade G2.5 limits. Micro-gram weight corrections are cleanly milled from the outer shroud rim, suppressing mechanical vibration and protecting motor drive-end bearings.

 

Twenty-Four Bar Hydraulic Envelope Proof Testing: Prior to paint application, 100% of machined casings are sealed on automated hydraulic proof test benches. Chambers are charged with clean test water to 2.4 MPa (twenty-four atmospheres) and held for fifteen continuous minutes, with digital sensors logging pressure stability to confirm zero wall sweating.

 

High-Solids Epoxy & Polyurethane Industrial Coating: External surfaces undergo automated steel-grit blasting to an Sa 2.5 profile to strip foundry scale. Castings are coated with heavy-build epoxy primer and finished with baked polyurethane industrial enamel, producing a hard paint shell that shrugs off damp mechanical room humidity and condensation.

 

Experience and Markets: Specialized Low-Headroom & Marine-Grade Field Installations

 

With over thirty years of specialized fluid machinery engineering, our horizontal in-line pumps have been deployed across diverse international territories. Today, our units operate in commercial, municipal, and industrial projects across more than fifty export destinations worldwide.
product-800-344

Subterranean Utility Tunnels in Northern European District Networks: In municipal heating and cooling utility tunnels across Germany, Poland, and Scandinavia, vertical clearance is restricted by concrete ceiling slabs and overhead cable trays. Our low-profile horizontal in-line pumps circulate hydronic heating and cooling water efficiently, fitting comfortably inside shallow trench vaults without requiring ceiling modifications.

 

Offshore Production Platforms & FPSO Machinery Decks in Southeast Asia: Aboard offshore oil platforms and floating production vessels operating in the South China Sea and Java Sea, wave-induced pitch and roll generate high pendulum forces on tall vertical equipment. Our horizontal in-line pumps keep center-of-gravity elevations minimal, relieving strain on skid mounting rails and ensuring reliable sea water washdown and freshwater cooling service.

 

Containerized Mobile Seawater Desalination Plants in the Middle East: Packaged reverse-osmosis skids operating across desert coastal facilities in Saudi Arabia and Oman are housed inside standard shipping container enclosures with strict height ceilings. Our horizontal pumps sit low against container floors, allowing multi-pump booster batteries to fit neatly beneath membrane rack assemblies.

 

Automotive Assembly Plants & Underground Flume Pumping in Latin America: In stamping and paint facilities across Mexico and Brazil, cooling water headers are routed through shallow floor trenches beneath robotic assembly lines. Our horizontal in-line units slip into trench profiles without requiring deep concrete excavation, moving high-volume cooling water reliably.

 

Export Timber Packaging & Marine Preservation Standards: Every pump is preserved with vapor-phase rust inhibitors, sealed inside heavy-gauge vacuum barrier bags with desiccant, and secured in ISPM 15 heat-treated solid timber export crates. Clear bilingual handling marks and center-of-gravity indicators ensure safe port handling.

 

Multimodal Logistics Coordination & Incoterms Trade Terms: We accommodate standard international trade frameworks, quoting clear pricing under FOB port terms or CIF delivered port arrangements. Urgent spare parts and small assemblies (50–500 kg) are dispatched via air cargo, while larger multi-unit container orders (500+ kg) are routed by sea freight accompanied by full bills of lading and custom clearance documentation.

 

Application: Industrial Process Trenches, Offshore Decks & Modular Skid Enclosures

 

The low overhead profile and straight-through piping geometry of the Horizontal Inline Centrifugal Pump make it the ideal hydronic solution for installations where vertical space is at a premium.
product-800-310

Mezzanine Crawlspaces & Low-Clearance Building Basements: In older architectural retrofits and mezzanine equipment galleries where overhead air ducts and cable trays leave barely two meters of height, upright pumps cannot be rigged for service. Our horizontal in-line units bolt right into straight pipe runs, hugging the floor line while leaving full overhead clearance.

 

Mobile Containerized RO & Ultrafiltration Filtration Vans: Mobile emergency water purification trailers and sea container water treatment plants must fit high-flow pumping into confined container envelopes. Laying the pump motor horizontally permits stacking membrane housings and chemical dosing racks directly above the pumping manifold.

 

Marine Vessel Engine Spaces & Offshore Barge Utilities: In commercial workboats and offshore supply vessels, sea motion induces severe pendulum overturning moments on tall upright machinery. Horizontal in-line mounting keeps machine mass glued near deck plates, easing mechanical stress on structural channel frames.

 

Automotive & Foundry Under-Floor Coolant Trenches: High-volume coolant recirculation lines in automotive stamping plants frequently run inside shallow concrete floor trenches. Our horizontal in-line layout slips straight into trench channels without demanding deep pit excavations.

 

Vaulted Basement District Heat Exchanger Substations: In historical urban centers where municipal heating substations occupy arched masonry basements, curved ceilings prevent vertical pump installation. Our horizontal in-line circulators handle secondary hot water transfer smoothly without requiring masonry demolition.

 

Our Advantages & Foundry Heritage: Hebei Dehuike Manufacturing Heritage & Operational Capabilities

 

Purchasing industrial fluid machinery demands dependable factory backing, rigorous metallurgical control, and transparent commercial partnership. Mechanical contractors, engineering consultants, and commercial distributors choose Hebei Dehuike Pump Industry Co., Ltd. because our manufacturing scale, commercial transparency, and engineering support deliver dependable project security.

product-800-266

Thirty Continuous Years of Fluid Machinery Engineering Roots: Our manufacturing team possesses over three full decades of dedicated fluid machinery casting and machining experience. That thirty-year legacy ensures that hydraulic profiles and horizontal motor brackets are designed with generous structural safety factors, eliminating premature casing cracking under pipeline stress.

 

Dedicated Heavy Machinery Works (Exceeding 6,000 m² Production Bays): Our company operates an enclosed manufacturing complex spanning greater than six thousand square meters. Production bays feature computerized furan sand molding lines, horizontal CNC boring mills, dynamic balancing stations, and a modern hydraulic test basin equipped for flow measurements up to 2,500 cubic meters per hour.

 

Long-Standing Vetted Sourcing Network (Over 900 Industrial Partners): Dependable shipment schedules depend on resilient material supply. We maintain long-term procurement ties with more than nine hundred certified component manufacturers, ensuring reliable delivery of premium electrical motor laminations, mechanical seals, and precision NSK/SKF drive bearings.

 

Standard Two-Year (24-Month) Full Mechanical Equipment Warranty: We stand behind our build quality by offering a full twenty-four-month manufacturer warranty covering the complete pump machine (wear parts excluded). This two-year warranty commitment reflects complete confidence in our casting soundess, precision CNC machining, and shop-floor quality procedures.

 

Verified International Compliance Standards (ISO 9001, EAC, RoHS): Factory operations run strictly under certified ISO 9001 quality management procedures. Equipment ships with official Eurasian Conformity (EAC) certificates and RoHS environmental declarations, ensuring seamless customs clearance for overseas industrial projects.

Commercial Procurement & Global Engineering Support

 

FAQ: Low-Headroom Piping Layouts, Alignment Rules & Mechanical Engineering Q&A

 

Our application engineering division has compiled authoritative answers to frequent technical inquiries regarding horizontal in-line pump installations.

 

Technical FAQ for Consulting Engineers & Mechanical Contractors

Q1: Q1: How does a horizontal in-line pump differ from a standard foot-mounted end-suction pump?

A conventional end-suction pump draws liquid axially through the end and discharges it radially upward at ninety degrees, requiring floor-level suction elbows, an offset piping manifold, and an extended concrete inertia base. A Horizontal Inline Centrifugal Pump features suction and discharge nozzles on the same horizontal axis, fitting directly into straight pipe runs like an in-line valve while keeping vertical equipment height exceptionally low.

Q2:Why are motor bearing fatigue lives often longer in horizontal in-line configurations?

In vertical motor mountings, the drive-end bearing must carry both rotor dead weight and downward hydraulic thrust continuously. In a horizontal in-line machine, the rotor mass is distributed as a pure radial load across front and rear bearings, avoiding continuous axial preloading. Standard off-the-shelf B3/B5 horizontal motors achieve extended bearing L10h service life under continuous run conditions.

Q3: What foundation support is necessary for horizontal in-line pump installations?

For smaller sizes (DN50 and DN65), the pump can be supported directly by rigid pipe hangers on either side of the casing. For intermediate and large models (DN80 to DN150), we recommend anchoring the volute's integral mounting foot to a simple steel channel skid or low concrete curb, with an adjustable support foot beneath the motor frame to eliminate overhung bending moments on piping flanges.

Q4: Can this horizontal in-line pump be disassembled without removing it from the pipeline?

Yes. The horizontal back-pullout construction allows all rotating parts-impeller, shaft sleeve, seal cartridge, and motor-to slide horizontally out the back of the volute casing once casing nuts are removed. Suction and discharge pipe joints remain undisturbed, saving hours of labor during seal maintenance.

Q5: What mechanical seal materials are standard for clean hydronic service?

Clean water duty utilizes balanced mechanical seals with silicon carbide stationary rings running against resin-impregnated carbon rotating faces, backed by potable-safe EPDM elastomers. For closed glycol loops, we specify silicon carbide versus tungsten carbide seal faces with FKM (Viton) O-rings to resist chemical swelling.

 

 

 

news-800-798

 

 

Hot Tags: horizontal inline centrifugal pump, China horizontal inline centrifugal pump manufacturers, suppliers, factory

Send Inquiry