Stainless Steel Multistage Pump

Stainless Steel Multistage Pump
Product Introduction:
A Stainless Steel Multistage Pump is requested when buyers need a pressure-building pump for water service and also want the wetted construction or project material configuration to be confirmed for the operating environment. In boiler feedwater and industrial pressure systems, the pump must provide a defined flow while developing enough head to overcome boiler-side pressure, elevation, pipe friction, valves and equipment losses. The DG series horizontal multistage centrifugal pump provides documented operating data for these high-head duties.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of stainless steel multistage pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk stainless steel multistage pump for sale here from our factory. Also, pricelist is available.

 

Staged Hydraulic Energy Accumulation

 

Industrial steam generation plants, supercritical co-generation facilities, deep underground dewatering networks, and seawater reverse-osmosis filtration trains share an uncompromising fluid-dynamic requirement: forcing substantial water volumes into high-pressure containment vessels against immense static and frictional counter-pressures. While standard single-stage end-suction centrifugal machines excel at moderate discharge elevations below 100 meters, physical impeller peripheral velocity limits prevent them from developing pressures exceeding 1.5 to 2.0 MPa without producing severe acoustic cavitation, acoustic resonance, and catastrophic material pitting.

The heavy-duty Stainless Steel Multistage Pump circumvents these mechanical constraints through a series-arranged hydraulic architecture. Rather than attempting to generate massive pressure within a single expansive casing, fluid passes sequentially through a succession of matched enclosed impellers and stationary diffuser chambers mounted along a single horizontal alloy shaft. Each consecutive stage imparts an incremental velocity increase that converts to static head inside precision stationary guide vanes, accumulating pressures reaching 8.8 MPa (dynamic water heads exceeding 880 meters). When fabricated from specialized austenitic or duplex stainless steels, this segmented construction resists high-velocity erosion, demineralized water dissolution, and boiler chemical corrosion while sustaining uninterrupted 24/7 service.

Manufactured by Hebei Dehuike Pump Industry Co., Ltd. (known across global heavy engineering sectors as DHK Pump), our DG series horizontal multistage pumping assemblies draw upon more than three decades of specialized metallurgical casting, precision machining, and high-pressure fluid machinery packaging. Operating from an integrated modern production facility spanning more than 8,000 m² and reinforced by an audited cooperative supply chain of 900+ certified industrial suppliers, Dehuike delivers high-integrity pressure-boosting packages to utility power plants, mining installations, and processing facilities in 50+ countries worldwide.

product-800-800

 

Structural Characteristics

 

A rigorous mechanical teardown of our DG series horizontal Stainless Steel Multistage Pump highlights the specialized structural architecture required to maintain hydraulic equilibrium and pressure containment across high-differential duties. Key engineering features are tailored to withstand extreme thermal expansion, hydraulic shock, and intense axial thrust forces:

Segmented Ring-Section Casing Clamped with High-Tensile Tie Rods: The pressure boundary comprises individual modular stage casings, an intake suction casing, and a heavy discharge delivery head machined from solid stainless steel castings or high-strength forgings. These stage sections are aligned via precision male-female spigot registers and clamped together longitudinally by high-tensile alloy steel tie bolts. This modular ring-section layout enables exact hydraulic tailoring by varying stage counts (from 6 up to 12 stages) while facilitating individual stage inspection during scheduled plant overhauls.

Self-Regulating Hydraulic Balance Disc & Balance Ring Assembly: Because multiple impellers face in the same orientation, cumulative hydraulic forces generate massive axial thrust directed toward the suction inlet (frequently exceeding tens of thousands of Newtons). Our pumps integrate an automatic hydraulic balance mechanism situated at the high-pressure discharge end. High-pressure liquid bleeds past a radial clearance into an axial balance chamber, automatically shifting the rotor axially to maintain an optimal lubricating fluid film between the rotating balance disc and stationary balance ring, neutralizing axial thrust without overloading drive bearings.

Precision Investment-Cast Stainless Steel Impellers & Diffusers: Every rotating impeller and stationary diffuser guide ring is produced via precision silica-sol investment casting in CF8M (AISI 316), CF3M (AISI 316L), or Duplex 2205 (CD4MCu). Mirror-smooth internal flow passages eliminate boundary layer friction, ensuring peak hydraulic efficiency and resisting cavitation erosion caused by boiler feed condensate or demineralized deaerator water.

Thermally Stabilized Cartridge Mechanical Seals & Cooling Plans: To handle boiler feed temperatures ranging from ambient up to 160°C without vapor flashing, seal chambers are fitted with balanced cartridge mechanical seals utilizing silicon carbide against tungsten carbide faces. External cooling jackets and API-compliant flushing circuits (such as API Plan 21 heat-exchanger cooling or Plan 23 closed-loop pumping ring circuits) cool seal face fluid, preventing elastomeric degradation and ensuring zero fluid loss.

Heavy-Duty Water-Cooled Bearing Housings: The rigid alloy steel drive shaft is supported at both ends by heavy-duty rolling element bearings (or oil-ring lubricated sleeve bearings on larger kilowatt frames) housed inside rigid cast-iron bearing brackets. The housings incorporate internal cooling water jackets that circulate auxiliary cooling water, maintaining lube oil temperature safely below 65°C even during continuous high-temperature boiler feed operation.

product-800-800

 

Technical Parameters

 

Proper engineering selection of a Stainless Steel Multistage Pump requires matching site-specific boiler operating pressures, system friction curves, and deaerator static elevations against verified hydraulic performance envelopes. Dehuike Machinery manufactures the DG multistage series across multiple standardized hydraulic frames, supporting volumetric deliveries up to 155 m³/h and dynamic discharge heads up to 886.5 meters.

The technical parameter table below summarizes verified operational data for representative DG series high-pressure models running at 2950 RPM, detailing flow throughput, total head, suction criteria, and drive motor sizing:

Model Frame

Flow Capacity

Total Head

Nominal Speed

Net Suction NPSHr

Hydraulic Eff.

Shaft Load

Electric Driver

Suction / Discharge

DG36-50x7

36 m³/h (10.0 L/s)

350 m Lift (3.43 MPa)

2,950 RPM

3.0 m Head

60% Eff.

57.2 kW Shaft

75 kW Motor

DN 80 mm / DN 80 mm

DG46-50x10

46 m³/h (12.8 L/s)

500 m Lift (4.90 MPa)

2,950 RPM

2.8 m Head

63% Eff.

100.0 kW Shaft

110 kW Motor

DN 80 mm / DN 80 mm

DG85-45x8

85 m³/h (23.6 L/s)

360 m Lift (3.53 MPa)

2,950 RPM

4.5 m Head

72% Eff.

115.8 kW Shaft

160 kW Motor

DN 100 mm / DN 100 mm

DG85-67x10

85 m³/h (23.6 L/s)

670 m Lift (6.57 MPa)

2,950 RPM

4.0 m Head

65% Eff.

238.5 kW Shaft

280 kW Motor

DN 150 mm / DN 150 mm

DG155-67x8

155 m³/h (43.1 L/s)

536 m Lift (5.25 MPa)

2,950 RPM

4.5 m Head

74% Eff.

305.6 kW Shaft

355 kW Motor

DN 150 mm / DN 150 mm

DG150-100x9

150 m³/h (41.7 L/s)

886.5 m Lift (8.69 MPa)

2,950 RPM

4.8 m Head

70% Eff.

517.5 kW Shaft

630 kW Motor

DN 200 mm / DN 150 mm

Critical Suction Margin & Temperature Protocol: High-temperature boiler feed systems operate near liquid saturation vapor pressure. To prevent catastrophic vapor flashing at the first-stage impeller eye, the Net Positive Suction Head Available (NPSHa)-derived from deaerator elevation, minimum liquid level, and intake pipe friction-must exceed the pump's listed NPSHr by a safety margin of at least 1.0 to 1.5 meters. Furthermore, targeting continuous pump operation within 85% to 105% of the Rated Optimal Efficiency Point (BEP) minimizes internal hydraulic recirculation, reduces balance disc wear, and protects against high-pressure vibrational fatigue.

product-800-800

 

Precision Heavy Assembly

 

Building a reliable high-pressure Stainless Steel Multistage Pump capable of generating 800+ meters of head demands sub-micron machining tolerances, flawless foundry metallurgy, and rigorous rotor dynamic balancing. At Dehuike, every multistage unit progresses through an ISO-certified manufacturing flow:

Induction Smelting & Vacuum Spectrographic Verification: Raw stainless steel materials are smelted in medium-frequency electric induction furnaces using certified virgin nickel, low-carbon ferrochrome, and refined alloying additions. Prior to tapping, molten heats are analyzed via vacuum optical emission spectrometry (OES) to ensure precise elemental compliance: Carbon strictly below 0.03% (for CF3M / 316L), Chromium (18.0%–20.0%), Nickel (10.0%–14.0%), and Molybdenum (2.0%–3.0%), eliminating intergranular corrosion susceptibility.

Precision Silica-Sol Investment Casting of Hydraulic Stages: Each impeller and stationary diffuser ring is formed via lost-wax silica-sol investment casting. This advanced foundry process produces smooth internal hydraulic vane contours with minimal surface roughness, drastically reducing hydrodynamic drag and ensuring identical head generation across every consecutive stage.

Multi-Axis CNC Machining of Casing Ring Registers: Individual stage casings, suction bodies, and discharge covers are machined on heavy multi-axis horizontal CNC boring centers. Mating spigots and O-ring sealing grooves are held within ±0.012 mm concentricity tolerances, ensuring perfect alignment across ten or more stacked stages without internal fluid bypass.

Rotor Stack Assembly & Two-Plane Dynamic Balancing: After impellers, shaft sleeves, and balance discs are shrink-fitted onto the forged alloy drive shaft, the complete rotating assembly undergoes dual-plane computerized dynamic balancing in accordance with ISO 1940 Grade G2.5 standards, eliminating harmonic unbalance forces that could induce shaft deflection at 2950 RPM.

Hydraulic Tie-Bolt Tensioning & Shell Clamping: The assembled stage stack is clamped together using high-strength alloy tie rods tensioned uniformly with calibrated hydraulic bolt tensioners. This controlled pre-stressing guarantees leak-tight metal-to-metal stage face sealing under full dynamic operating pressures.

 

Global High-Pressure Deployments

 

With over 30 years of continuous specialized manufacturing experience in high-pressure fluid machinery, Hebei Dehuike Pump Industry Co., Ltd. has established a formidable global footprint. Our heavy Stainless Steel Multistage Pump assemblies operate reliably across critical infrastructure and process plants in more than 50 countries:

Thermal Power Co-Generation & Biomass Boiler Feed (Southeast Asia): Installed in biomass power plants, palm oil mill cogeneration stations, and industrial paper mill boiler houses across Indonesia, Thailand, and the Philippines, delivering continuous boiler feed at pressures up to 6.5 MPa and water temperatures exceeding 130°C.

Seawater Reverse Osmosis (SWRO) Desalination (Middle East & Mediterranean): Manufactured in Duplex 2205 (S31803) stainless steel to drive high-pressure sea water through reverse-osmosis filtration membranes in industrial desalination plants across the UAE, Saudi Arabia, and North Africa.

Deep Underground Mining Dewatering (South America & Africa): Deployed in deep-level copper and gold mining operations in Chile and Zambia to lift clear pit drainage water from underground collection sumps directly to surface holding ponds in a single high-lift stage.

High-Pressure Industrial Process Boosting (Europe & North America): Serving chemical manufacturing facilities, steel mill descaling headers, and municipal high-elevation water distribution networks across Germany, Poland, and Mexico.

product-800-800

 

High-Pressure Hydraulic Testing

 

Operating at discharge pressures approaching 9 MPa demands absolute structural integrity and certified pressure containment. Dehuike enforces rigorous non-destructive examination and hydraulic testing under accredited ISO 9001 quality management governance, supported by international EAC and RoHS product certifications:

Hydrostatic Proof Pressure Containment Testing: Every assembled multistage pump casing undergoes hydrostatic pressure testing at 150% of maximum rated design pressure (reaching test pressures of 12.0 to 15.0 MPa for high-head builds). Pressure is maintained across a continuous 30-minute dwell window, verified by digital pressure transducers to confirm zero joint weeping or casting distortion.

100% Non-Destructive Examination (UT & PT): High-tensile casing tie rods, discharge heads, and shaft forgings undergo 100% ultrasonic flaw inspection (UT) to verify freedom from subsurface voids or micro-cracks. Impeller vanes and balance discs undergo liquid dye penetrant testing (PT) across all high-stress radii.

Closed-Loop Full-Speed Hydraulic Bench Validation: Completed pump assemblies are mounted on our automated computerized closed-loop hydraulic testing station. Calibrated electromagnetic flowmeters, high-frequency dynamic pressure sensors, and digital torque meters record flow, total head, absorbed kilowatt power, and efficiency across multiple throttling points, verifying compliance with ISO 9906 Grade 2B standards.

Extended Full-Load Thermal & Vibration Run-In: Units undergo full-load mechanical testing to verify balance disc hydraulic equilibrium and monitor bearing housing vibration velocity against ISO 10816-3 Class II limits (maintaining overall RMS vibration strictly below 2.8 mm/s).

product-800-800

 

Engineering Lifecycle Support

 

Dehuike delivers comprehensive pre-purchase engineering collaboration, custom power skid packaging, and dependable international logistics to support boiler plant EPC contractors, consulting engineers, and plant operators:

Pre-Purchase Thermodynamic Hydraulic Sizing & CAD Integration: Our specialized high-pressure engineering desk conducts thorough system analyses prior to equipment selection. By reviewing boiler drum operating pressures, deaerator elevations, pipe friction losses, and feedwater temperatures, our engineers compute exact Net Positive Suction Head margins (NPSHa vs NPSHr), size required motor kilowatts, and provide customized 2D/3D CAD dimensional models within 2 hours of technical inquiry.

Turnkey Power Skid Packages & Variable Frequency Drives: We supply complete factory-assembled pumping skids mounted on heavy structural steel baseplates. Packages include high-efficiency medium- or high-voltage electric motors (IP55/IP66, 380V/415V/6kV/10kV at 50Hz or 60Hz), precision flexible disc couplings, integrated oil lubrication consoles, and variable frequency drive (VFD) compatibility for automated boiler water level modulation.

Standardized International Multimodal Logistics: We manage international shipments strictly via maritime container shipping (>500 kg heavy skid assemblies) and dedicated air transport (50–500 kg for urgent maintenance spares). Commercial contracts are quoted under transparent international trade terms, offering FOB and CIF destination port agreements without hidden port handling fees. All units are secured inside heavy-duty, seaworthy non-fumigation plywood crates with internal vapor-corrosion-inhibitor wrapping.

Comprehensive 24-Month Factory Warranty: Every complete Stainless Steel Multistage Pump manufactured by our works carries an official 24-month (two-year) comprehensive factory warranty covering the casing, rotor, balance assembly, and structural base against defects in materials and craftsmanship.

 

Material Scope and Documentation Control

 

Stainless steel pump procurement should define the construction scope in writing. The buyer may request stainless steel for the pump casing, wetted components, shaft-related parts, fasteners or a specific combination of components, depending on the application and the supplier's available configuration. Because project requirements vary, the purchase specification should state exactly which parts require stainless steel and which grade is required. This prevents confusion between a general stainless steel product title and the detailed bill of materials used for production.
Documentation control is especially useful in engineering procurement. The final technical file can include the confirmed model, operating point, motor rating, connection arrangement, material scope, packing requirement and any agreed inspection or test documents. These records help contractors coordinate with piping and electrical teams. They also give plant owners a reference for future service, spare-parts discussion and material verification if the operating condition changes.
Water quality should be reviewed with the same care as the hydraulic duty. Treated water, condensate-related water, site process water or other industrial water streams may have different effects on material selection. The pump proposal should not rely on the phrase stainless steel alone. It should connect the requested construction to the liquid condition, expected operating environment and the maintenance practices planned by the user.
For overseas procurement, clearly stated construction and documentation requirements also improve quotation comparison. One offer may include a different stainless steel scope from another offer, even when the product title appears similar. By separating hydraulic parameters from material scope, buyers can compare technical proposals more accurately and reduce the risk of accepting a lower-cost option that does not match the project requirement.

 

Installation and Operation Considerations

 

The pump installation should maintain the suction and discharge conditions considered during selection. Pipework should be supported to avoid unplanned loads on the pump. Valves, gauges and service access should be arranged for practical operation. For higher-power DG configurations, foundation planning, lifting route and motor access should be considered before the equipment arrives at the site.
During operation, record pressure readings, source level, motor load, operating schedule and changes in demand. If the system behavior changes, review the complete route: feedwater source, inlet condition, valves, strainers, downstream equipment and control settings. This helps distinguish a pump issue from a system change or operating condition.
For stainless steel construction, maintenance teams should also track the water condition and any change in treatment practice. If the liquid condition changes, the material suitability should be reviewed with the supplier or project engineer. Keeping model data, material confirmation and operating records together creates a stronger basis for future service decisions.
product-800-534

 

Manufacturing, Quality and Service Support

 

Dehuike Pump Industry integrates design and development, production and processing, sales and service. The company profile describes process control from raw materials through design, hydraulic model testing, casting, machining, inspection, assembly and testing, followed by installation, commissioning, operation and after-sales service. This process supports pump orders that require clear technical coordination from selection through delivery.
The company profile states that its quality management system has received ISO international quality management system certification. It also states that Dehuike Pump Industry has more than 40 years of industry experience, develops and produces more than 30 series of industrial pumps, and serves customers in more than 90 countries. Its products are used across sectors including electric power, metallurgy, mining, coal, petroleum, chemical processing and sewage treatment.
For a DG stainless-steel-related order, confirm the model, operating point, motor rating, connection arrangement, required material scope, documentation requirements, packing method and delivery conditions before production. A confirmed technical scope helps the buyer coordinate pump selection with piping, electrical planning, site installation and later service communication.
Before delivery, the order information can be checked against the agreed duty and construction scope. This review may include model designation, quantity, motor requirement, inlet and outlet dimensions, packing method and the documents needed by the receiving team. Clear delivery preparation is valuable for boiler houses and industrial sites where installation work must be coordinated with shutdown windows, lifting arrangements and other equipment already on site.

 

Frequently Asked Questions

 

Q: What is a Stainless Steel Multistage Pump?

A: It is a multistage centrifugal pump selected for pressure-required water service where stainless steel construction or a stainless-steel material scope is requested. The final material grade and construction details should be confirmed for the project.

Q: Which DG models are included in this selection?

A: Selected DG examples include DG36-50x7 at 36 m3/h and 350 m head, DG46-50x10 at 46 m3/h and 500 m head, DG85-67x10 at 85 m3/h and 670 m head, and DG150-100x9 at 150 m3/h and 886.5 m head.

Q: Can this pump be used for boiler feedwater?

A: The DG series is used for medium- and low-pressure boiler feedwater service. Final selection should be checked against design flow, total head, inlet conditions, feedwater arrangement, electrical requirements and the confirmed construction scope.

Q: Does the data specify a stainless steel grade?

A: The hydraulic performance data confirms model performance values. The specific stainless steel grade, seal arrangement and construction details should be stated and confirmed in the project technical scope before production.

Q: What information is needed for a quotation?

A: Provide flow, total head, suction conditions, water or feedwater details, requested material requirement, electrical supply, pipe connections, installation limits and documentation needs. This supports a technically aligned Stainless Steel Multistage Pump proposal.

 

news-800-798

 

 

Hot Tags: stainless steel multistage pump, China stainless steel multistage pump manufacturers, suppliers, factory

Send Inquiry