Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of submersible slurry pump for sand mining in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk submersible slurry pump for sand mining for sale here from our factory. Also, pricelist is available.
Introduction
Submersible Slurry Pump for Sand Mining is designed for dredging, sand recovery, riverbed cleaning, and mineral handling where ordinary water pumps cannot tolerate a heavy solids load. The pump is installed directly in the slurry, allowing the suction side to remain close to the material being moved. This layout reduces the need for a long suction pipe and helps maintain a steady feed when sand settles quickly or the working water level changes.
The product is intended for buyers who need practical solids-handling performance rather than a decorative specification list. Final selection should be based on slurry density, particle size, required capacity, discharge distance, lift, liquid temperature, and power supply. These details are confirmed before production so the hydraulic passage, motor configuration, cable length, and installation arrangement match the actual site.

Specifications and Technical Data

|
Type |
Flow |
Head |
Speed |
Eff |
Shaft power |
Mating motor |
Weight |
Caliber (mm) |
|
|
Inlet |
Outlet |
||||||||
|
50NSQ25-32-5.5 |
17.5 |
36 |
2900 |
42 |
4.05 |
5.5 |
105 |
50 |
|
|
25 |
32 |
49 |
4.35 |
||||||
|
30 |
27.5 |
51 |
4.45 |
||||||
|
50NSQ40-30-7.5 |
28 |
33 |
2900 |
51 |
4.94 |
7.5 |
180 |
50 |
|
|
40 |
30 |
62 |
5.27 |
||||||
|
48 |
26.5 |
60 |
5.78 |
||||||
|
80NSQ50-25-7.5 |
35 |
27.5 |
2900 |
45 |
5.8 |
7.5 |
140 |
80 |
|
|
50 |
25 |
56 |
6 |
||||||
|
60 |
22.5 |
61 |
6 |
||||||
|
100NSQ70-22-11 |
49 |
23.5 |
1450 |
61 |
5.14 |
11 |
260 |
100 |
|
|
70 |
22 |
70 |
6 |
||||||
|
80 |
20.5 |
68 |
6.57 |
||||||
|
80NSQ80-20-11 |
56 |
22.5 |
1450 |
64 |
5.21 |
11 |
170 |
100 |
|
|
80 |
20 |
71 |
6.14 |
||||||
|
96 |
17 |
70 |
6.35 |
||||||
|
100NSQ100-15-7.5 |
70 |
17.5 |
1450 |
59 |
5.65 |
7.5 |
165 |
100 |
|
|
100 |
15 |
70 |
5.9 |
||||||
|
120 |
12.5 |
68 |
6 |
||||||
|
100NSQ100-25-15 |
70 |
28 |
1450 |
49 |
9 |
15 |
280 |
100 |
|
|
100 |
25 |
61 |
9.5 |
||||||
|
120 |
20.5 |
63 |
10.5 |
||||||
|
100NSQ100-10-7.5 |
77 |
11.5 |
1450 |
60 |
4 |
7.5 |
150 |
100 |
|
|
110 |
10 |
67 |
4.47 |
||||||
|
132 |
7 |
65 |
3.9 |
||||||
|
100NSQ100-40-22 |
70 |
44.5 |
1450 |
52 |
16.32 |
22 |
820 |
150 |
|
|
100 |
40 |
60 |
18.17 |
||||||
|
120 |
36 |
58 |
20.29 |
||||||
|
150NSQ100-30-22 |
91 |
35 |
1450 |
63 |
13.7 |
22 |
420 |
150 |
|
|
100 |
30 |
69 |
15.5 |
||||||
|
120 |
24 |
63 |
16.2 |
||||||
|
150NSQ140-41-37 |
98 |
46 |
1450 |
54 |
22.75 |
37 |
1150 |
150 |
|
|
140 |
41 |
63 |
24.83 |
||||||
|
168 |
31.5 |
60 |
27.85 |
||||||
|
150NSQ300-30-45 |
240 |
35 |
1450 |
60 |
22.2 |
45 |
750 |
150 |
|
|
300 |
30 |
65 |
25.2 |
||||||
|
340 |
24 |
62 |
25.3 |
||||||
|
150NSQ300-20-30 |
270 |
24.5 |
1450 |
64.7 |
17.32 |
30 |
820 |
150 |
|
|
300 |
20 |
73.5 |
20.39 |
||||||
|
340 |
17.8 |
71 |
21.87 |
||||||
|
200NSQ400-20-30 |
275 |
26.8 |
1450 |
62 |
19 |
30 |
720 |
200 |
|
|
400 |
20 |
71 |
21 |
||||||
|
475 |
16.5 |
72 |
22 |
||||||
|
200NSQ300-40-55 |
255 |
44.5 |
1450 |
58 |
36.59 |
55 |
1380 |
200 |
|
|
300 |
40 |
71 |
38.38 |
||||||
|
350 |
35.7 |
70 |
41.69 |
||||||
|
200NSQ350-20-37 |
245 |
22.5 |
1450 |
66 |
22.8 |
37 |
950 |
200 |
|
|
350 |
20 |
77.8 |
24.5 |
||||||
|
420 |
17 |
75 |
25.9 |
||||||
|
200NSQ450-40-75 |
345 |
44.5 |
1450 |
62 |
47.92 |
75 |
1750 |
200 |
|
|
450 |
40 |
73.2 |
51.83 |
||||||
|
500 |
35.5 |
71 |
57.23 |
||||||
|
200NSQ400-25-45 |
280 |
28 |
1450 |
67 |
31.89 |
45 |
1280 |
200 |
|
|
400 |
25 |
77.5 |
35.16 |
||||||
|
480 |
22 |
75 |
38.37 |
||||||
|
200NSQ400-30-55 |
280 |
35 |
1450 |
59 |
45 |
55 |
1300 |
200 |
|
|
400 |
30 |
72 |
46 |
||||||
|
480 |
27 |
75 |
46.5 |
||||||
Product Detail
The lower pump section provides the main solids-handling path. A wear-resistant suction opening guides sand-laden liquid into the impeller area, while the discharge passage carries the mixture to the delivery line. Depending on the abrasive nature of the slurry, wetted parts can be discussed in suitable cast iron, high-chrome alloy, or other confirmed materials. Material selection should follow actual wear conditions rather than a generic promise of universal corrosion resistance.
The motor is sealed for submerged operation and is connected to the pump through a compact vertical arrangement. A lifting eye or lifting bracket supports safe handling during installation and inspection. The cable entry, sealing elements, bearing arrangement, and shaft protection are important details for continuous work in wet and abrasive surroundings. They should be checked together rather than treated as separate accessories.

Features and Equipment Characteristics
- Direct immersion helps shorten the suction path and makes the unit suitable for pits, sumps, settling ponds, and temporary dredging points.
- The slurry passage is arranged for water carrying sand and other suspended solids, reducing the risk of rapid blockage caused by ordinary clean-water pump passages.
- A submersible layout saves floor space and avoids a separate priming procedure when the pump remains correctly immersed.
- Wear parts can be reviewed according to slurry abrasiveness, allowing maintenance planning to be based on real operating conditions.
- The pump can be arranged with a guide frame, lifting system, flexible hose, control cabinet, or other site accessories after the application is reviewed.
- The product page should publish the verified duty point, not a broad product-family range, so buyers can compare the proposal with their own system.

Our Advantages
The main advantage of this solution is the match between pump arrangement and difficult material conditions. When sand accumulates near the intake point, a surface pump with a long suction line may require additional support equipment and more careful priming control. A submerged unit places the hydraulic inlet at the source of the mixture, which can simplify the layout and shorten the route from collection point to discharge pipe.
Another advantage is easier adaptation to changing work areas. Sand recovery and dredging operations often move from one point to another. A lifting arrangement and suitable discharge connection make relocation more manageable, while the compact form leaves more room around the pit or barge. This does not remove the need for a proper lifting plan, electrical protection, and inspection routine; it simply makes the equipment easier to integrate into a changing site.

Production Process
A controlled production route begins with duty-point review and drawing confirmation. The pump body, impeller, shaft, sealing parts, motor, cable, and discharge connection are checked against the confirmed configuration. Casting or machining quality is reviewed before assembly. After assembly, rotation direction, insulation condition, sealing performance, vibration, current, and basic hydraulic operation are inspected according to the agreed test arrangement. Test records should be retained with the pump identification and shipment documents.
For abrasive service, inspection should focus on the areas that influence service life: impeller clearance, passage smoothness, shaft runout, seal seating, cable entry, and lifting points. A clear inspection record gives the buyer a practical reference for future spare-part planning and troubleshooting.

Application
Typical applications include sand mining pits, river sand recovery, dredging ponds, settling basin cleaning, aggregate washing systems, mineral slurry transfer, floodwater containing sediment, and construction-site excavation drainage. The pump is especially useful when the liquid contains settled sand that must be lifted from a low point and transferred through a pipeline.
For each project, provide the material description, expected operating hours, water depth, pipeline length, elevation difference, and power conditions. If the slurry contains sharp gravel, oversized solids, chemical additives, or unusually high temperature, these details must be stated before selection. They affect the pump passage, wear material, sealing arrangement, and motor protection requirements.

Working Principle
After the motor receives power, it turns the shaft and impeller. The rotating impeller transfers energy to the sand-water mixture, creating a pressure difference that draws the slurry through the lower intake. The mixture is guided through the pump passage and leaves through the discharge outlet toward the delivery pipe. In a submerged arrangement, the surrounding liquid helps keep the inlet flooded, while the pump body and cable seals protect the motor compartment from water entry.
Stable operation depends on more than motor power. The intake must remain adequately submerged, the discharge line must be sized for the selected capacity, and the pump should not be operated dry or outside the agreed duty point. Excessive throttling, blocked discharge, unstable power, and long-term operation with an abnormal sound or vibration can accelerate wear.

FAQ and Inquiry Guide
Q: Can this pump handle sand?
A: Yes, it is intended for water containing sand and suspended solids. Particle size, concentration, and hardness must be confirmed before the final configuration.
Send the required flow, vertical lift, pipeline length, pipe diameter, and working hours. The duty point can then be reviewed against the system.
Q: Can the material be changed?
A: Material options should be discussed according to abrasion, corrosion, temperature, and service interval. Do not select only by price.
Q: What information is needed for an inquiry?
A: Please include application, medium, flow, head, solids size, water depth, power supply, discharge connection, quantity, and destination port.
Q: How should the pump be maintained?
A: Inspect cable seals, lifting parts, discharge connections, current, vibration, and wear parts at a planned interval. Remove the pump safely before inspection.

Send Your Requirement
For a practical quotation of Submersible Slurry Pump for Sand Mining, please send the duty point and site conditions rather than only the pump name. Our technical review can then recommend a suitable configuration, connection arrangement, wear-part material, and control protection. Please feel free to send your detailed requirements; a clear site description helps shorten selection time and reduces the risk of an unsuitable pump.
Hot Tags: submersible slurry pump for sand mining, China submersible slurry pump for sand mining manufacturers, suppliers, factory
