Vertical Multistage Centrifugal Pump

Vertical Multistage Centrifugal Pump
Product Introduction:
A Vertical Multistage Centrifugal Pump is designed for water systems that need high pressure, stable delivery and a compact vertical footprint. Instead of occupying a long horizontal base, the vertical inline structure stacks multiple impellers along a vertical axis, allowing the pump to build head stage by stage while keeping the installation area efficient. This makes the CDL and CDLF series suitable for building water supply, industrial pressure boosting, process water transfer, filtration circulation and utility systems where floor space and pressure stability are both important.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of vertical multistage centrifugal pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk vertical multistage centrifugal pump for sale here from our factory. Also, pricelist is available.

 

Vertical Multistage Centrifugal Pump for Space-Saving Pressure Systems

 

A Vertical Multistage Centrifugal Pump is designed for water systems that need high pressure, stable delivery and a compact vertical footprint. Instead of occupying a long horizontal base, the vertical inline structure stacks multiple impellers along a vertical axis, allowing the pump to build head stage by stage while keeping the installation area efficient. This makes the CDL and CDLF series suitable for building water supply, industrial pressure boosting, process water transfer, filtration circulation and utility systems where floor space and pressure stability are both important.

The CDL / CDLF series covers a wide performance envelope. The documented rated flow range extends from CDL2 / CDLF2 at 2 m3/h to CDL150 / CDLF150 at 150 m3/h. Flow ranges in the series overview reach from 1-3.5 m3/h for the smallest group to 80-180 m3/h for the largest group. Maximum pressure values in the overview reach up to 30 bar for CDL42 / CDLF42, and the listed motor power ranges extend from compact 0.37 kW configurations to 75 kW configurations for larger flow series.

For buyers comparing a Vertical Multistage Centrifugal Pump with a horizontal multistage pump, the main difference is not only orientation. A vertical pump is commonly selected when the equipment room, booster skid or process line requires a compact inline arrangement, easier piping alignment in a vertical package and clear access around the pump base. The product should still be selected by flow, head, motor power, pressure level, material form and connection requirement rather than by orientation alone.

product-800-800

 

CDL and CDLF Construction Options

 

The CDL and CDLF designations provide two material forms within the vertical multistage family. The parameter sheet identifies CDL as a cast-iron base form and CDLF as a stainless wetted-parts form. Both forms are listed across the series range from CDL2 / CDLF2 through CDL150 / CDLF150. This gives buyers a structured way to discuss ordinary clean-water service, stainless wetted-parts requirements and project-specific construction needs without changing the basic vertical multistage operating principle.

CDLF connection options vary by size. The overview lists CDLF oval flange sizes from DN25 to DN125 across the series. DIN flange and pipe-thread options are listed for smaller ranges, while larger flow series use larger flange connections. This matters in real projects because a pump quotation must coordinate with the pipe system, valve selection, skid layout and maintenance access. A correct Vertical Multistage Centrifugal Pump selection includes both hydraulic performance and connection compatibility.

The documented technical conditions for the performance tables include 50Hz operation, approximately 2900 rpm, and 3x380V 50Hz supply in the detailed model sheets. The temperature range in the series overview is listed as -15 to +120 degrees Celsius across the CDL/CDLF families. Final suitability should still be confirmed against the actual liquid, installation environment and project requirements, especially when the user requests CDLF stainless wetted parts.

product-800-800

 

Series Performance Overview

 

The following overview condenses the CDL/CDLF series range for preliminary model family selection. It uses the performance range and technical specification data from the CDL/CDLF vertical multistage pump table. The values should be used to identify a suitable series before checking a specific model line and duty point.

Series

Rated Flow (m3/h)

Flow Range (m3/h)

Max Pressure (bar)

Motor Range (kW)

Max Efficiency (%)

CDLF Oval Flange

Large DIN Flange

CDL2 / CDLF2

2

1-3.5

23

0.37-3

46

DN25

DN25

CDL4 / CDLF4

4

1.5-8

21

0.37-4

59

DN32

DN32

CDL8 / CDLF8

8

5-12

21

0.75-7.5

64

DN40

DN40

CDL16 / CDLF16

16

8-12

22

2.2-15

66

DN50

DN50

CDL20 / CDLF20

20

10-28

23

1.1-18.5

69

DN50

DN50

CDL32 / CDLF32

32

16-40

26

1.5-30

76

DN65

DN65

CDL42 / CDLF42

42

25-55

30

3.0-45

78

DN80

DN65

CDL65 / CDLF65

65

30-80

22

4.0-45

80

DN100

DN100

CDL85 / CDLF85

85

50-110

17

5.5-45

81

DN100

DN100

CDL120 / CDLF120

120

60-150

16

11-75

74

DN125

DN125

CDL150 / CDLF150

150

80-180

16

11-75

73

DN125

DN125

This range allows a buyer to move from a small pressure transfer requirement to a large-flow water supply package within one vertical multistage platform. CDL2 / CDLF2 is suited to compact duties around a 2 m3/h rated flow. CDL20 / CDLF20 covers a 20 m3/h rated flow and a 10-28 m3/h flow range. CDL65 / CDLF65 covers a 65 m3/h rated flow and a 30-80 m3/h flow range. CDL150 / CDLF150 extends to a 150 m3/h rated flow and an 80-180 m3/h flow range.

 

Representative CDL/CDLF Model Data

 

The table below shows representative model points from multiple CDL/CDLF series. Each row keeps the model family, motor power, rated-flow head and selected low/high flow points together. Rows with visible correction notes in the source table are not used. The data is intended for product-page comparison and initial inquiry preparation, not for replacing a final selection curve review.

The data shows why vertical multistage selection requires more than one headline flow value. CDLF4-160 is listed with 3 kW motor power and 128 m head at the 4 m3/h rated point, while CDLF32-100 is listed with 18.5 kW motor power and 138 m head at 32 m3/h. Both are vertical multistage pumps, but their pipe size, motor planning, foundation load and operating context are very different.

Larger vertical models can combine high flow with substantial head. CDLF42-100 is listed at 42 m3/h rated flow and 203 m head, with 37 kW motor power. CDLF65-60 is listed at 65 m3/h and 124 m head, also with 37 kW motor power. CDLF85-50 is listed at 85 m3/h and 110 m head. These examples show the practical role of the Vertical Multistage Centrifugal Pump in large building systems, industrial headers and utility transfer lines.

 

Where a Vertical Multistage Pump Creates
Value

 

A vertical multistage configuration is valuable when the system needs pressure but cannot dedicate excessive floor area to pump equipment. Booster rooms in commercial buildings often have limited space. Industrial utility areas may need several pumps installed close to pipe headers. Water treatment or filtration packages may require a compact pump that can fit inside a skid or equipment frame. The vertical inline layout supports these conditions while still providing multistage head development.
The same product family can support different water-supply roles. In a building, it may raise pressure from a storage tank to upper zones. In a factory, it may supply process water, rinsing water or equipment cooling loops. In a water treatment installation, it may move water through filters or membranes where pressure loss must be overcome. In a distribution system, it may serve as a compact pressure station. Each application needs a different flow/head point, so the specific CDL/CDLF model should be chosen from the system duty rather than from a generic name.
For distributors, the broad CDL/CDLF range simplifies quotation work. A single product family can cover small booster duties, mid-range plant utility duties and larger water-supply packages. For contractors, vertical installation can help with layout planning. For plant owners, the multistage structure supports pressure demand without moving immediately to a larger horizontal pump package. For maintenance teams, the clear model structure helps organize spare-parts discussions and future replacement planning.

product-800-800

 

Select by Flow, Head and Installation Space

 

Correct selection starts with the duty point. Flow should be stated in m3/h or l/s, and total head should include elevation, required discharge pressure, pipe friction, valves, fittings and downstream equipment losses. The CDL/CDLF table provides head values at multiple flow points for each model. This helps identify whether a model can operate near the required flow instead of relying only on the maximum head or maximum pressure stated for a series.

Installation space should be reviewed early. A Vertical Multistage Centrifugal Pump can reduce floor length, but the equipment still needs enough vertical clearance, service space around the motor, access to the suction and discharge connections, and practical room for valves and gauges. In a booster system with multiple pumps, spacing also affects manifold layout and maintenance safety. The vertical footprint is an advantage only when the surrounding installation is designed properly.

Material form should also be matched to the liquid and project standard. The table identifies CDL as cast-iron base and CDLF as stainless wetted parts. For clean water and many pressure supply systems, the correct choice depends on the liquid condition, buyer requirement and budget. Where stainless wetted parts are requested, the inquiry should state whether the requirement is based on water quality, project specification, corrosion concern or customer standard.

 

Application Scenarios

 

Commercial building water supply is one of the common scenarios for this pump type. A vertical multistage unit can support pressure delivery from a tank or low-pressure source to a higher pressure zone. When different zones require different pressure levels, the pump duty should be calculated for the specific area it serves. The compact vertical layout helps when equipment rooms have limited floor space.

Industrial water systems may use CDL/CDLF pumps for process water transfer, equipment supply, cleaning water, cooling loops or utility pressure lines. The selected model should match the operating flow and the pressure required at the point of use. CDLF options can be considered when stainless wetted parts are required by water quality or project preference.

Water treatment and filtration systems often create pressure losses across equipment. A Vertical Multistage Centrifugal Pump can supply water through filter vessels, treatment units or circulation loops when the required duty falls within the CDL/CDLF range. The designer should check the pressure loss of the treatment equipment, the clean and fouled conditions, and the actual flow required by the process.

Agricultural and irrigation support applications may require stable pressure for transfer, washing, dosing support or controlled distribution. For large open-field pumping, other pump types may also be considered, but a vertical multistage pump can be valuable where pressure, compact installation and clean-water handling are required together.

 

Purchasing Advantages from Dehuike Pump Industry

 

Dehuike Pump Industry integrates design and development, production and processing, sales and service. Its company profile describes process control from raw materials through design, hydraulic model testing, casting, machining, inspection, assembly and testing, followed by installation, commissioning, operation and after-sales service. This production and service chain supports overseas buyers that need a pump supplier capable of discussing both model data and project requirements.

The company profile states that Dehuike Pump Industry has more than 40 years of industry experience, develops and produces more than 30 series of industrial pumps, and serves customers in more than 90 countries. It also states that the company has received ISO international quality management system certification. These facts support procurement confidence without relying on unsupported ranking claims or unverifiable customer stories.

For a CDL/CDLF order, buyers can confirm the model, duty point, motor power, connection form, material form, documentation requirement, packing method and delivery needs before production. This is especially important for vertical multistage pump packages because pipe alignment, flange style, electrical planning and equipment-room layout must work together. A clear inquiry helps the supplier return a quotation that is easier to compare and easier to implement.

Inquiry Checklist

  • Required flow and total head at the operating point.
  • Application type, such as building pressure boosting, industrial water supply, water treatment or utility transfer.
  • Preferred CDL or CDLF material form, including any stainless wetted-parts requirement.
  • Power supply, frequency, motor requirement and control method if already specified.
  • Connection requirement, pipe size, flange preference and installation space.
  • Liquid condition, temperature requirement and any water-quality concern.
  • Quantity, documentation needs, packing requirements and target delivery schedule.
product-800-800

 

Frequently Asked Questions

 

Q: What is a Vertical Multistage Centrifugal Pump?

A: It is a centrifugal pump with multiple impeller stages arranged vertically to build pressure in a compact footprint. CDL/CDLF models are used for clean-water pressure supply, building boosting, industrial utility systems and treatment equipment support.

Q: What is the difference between CDL and CDLF?

A: The table identifies CDL as the cast-iron base form and CDLF as the stainless wetted-parts form. Both forms appear across the CDL/CDLF series range. Final material choice should match the liquid, project standard and budget.

Q: What flow range is available?

A: The series overview lists rated flows from 2 m3/h to 150 m3/h. Flow ranges extend from 1-3.5 m3/h for CDL2/CDLF2 to 80-180 m3/h for CDL150/CDLF150.

Q: What pressure range is shown in the overview?

A: The overview lists maximum pressure values by series from 16 bar to 30 bar. CDL42/CDLF42 is listed with the highest overview value of 30 bar.

Q: Can this pump be used for stainless wetted-parts service?

A: Yes, CDLF is identified as the stainless wetted-parts form. The final construction and material requirements should be confirmed for the actual water condition and project specification.

Q: What information is needed for a quotation?

A: Provide the required flow, total head, application, material form, power supply, connection requirement, installation space and liquid condition. This allows the supplier to match the Vertical Multistage Centrifugal Pump to the real duty.

Q: Request a Vertical Multistage Centrifugal Pump Quotation

A: Send your required flow, total head, water condition, material preference and installation requirements. Dehuike Pump Industry can help review the suitable CDL or CDLF Vertical Multistage Centrifugal Pump configuration for building water supply, industrial pressure boosting, treatment systems or utility transfer projects.

 

news-800-798

 

 

Hot Tags: vertical multistage centrifugal pump, China vertical multistage centrifugal pump manufacturers, suppliers, factory

Send Inquiry