Horizontal Centrifugal Slurry Pump

Horizontal Centrifugal Slurry Pump
Product Introduction:
The Horizontal Centrifugal Slurry Pump is designed for transferring liquid mixtures that contain abrasive or suspended solids. It is intended for process duties where clear-water pumps may experience rapid wear, unstable operation or unsuitable hydraulic performance. Typical media include mineral slurry, sand slurry, tailings, concentrate, ash residue and selected industrial waste streams.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of horizontal centrifugal slurry pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk horizontal centrifugal slurry pump for sale here from our factory. Also, pricelist is available.

 

Introduction

 

Horizontal Centrifugal Slurry Pump for Abrasive Slurry Transfer

The Horizontal Centrifugal Slurry Pump is designed for transferring liquid mixtures that contain abrasive or suspended solids. It is intended for process duties where clear-water pumps may experience rapid wear, unstable operation or unsuitable hydraulic performance. Typical media include mineral slurry, sand slurry, tailings, concentrate, ash residue and selected industrial waste streams.

The horizontal arrangement places the pump and drive on a base-mounted assembly, allowing the wet end, shaft-sealing area, coupling and drive components to be inspected during planned maintenance. The pump is not selected by flow rate alone. Slurry specific gravity, solids concentration, particle size, particle hardness, temperature, suction condition and total dynamic head all affect the final configuration.

The Horizontal Centrifugal Slurry Pump should be matched to the actual operating point and the approved performance curve for the selected model. Wet-end materials, impeller design, liner arrangement, shaft seal and drive specifications must be confirmed before production. This approach gives engineering contractors, mine operators and distributors a clearer basis for selection, quotation and spare-parts planning.

Send the slurry data and system requirements for a model recommendation, technical drawing and project quotation.

product-750-750

 

Specifications

 

product-750-750

 

MODEL

Maximum
power
allowed

Material

Fresh Water Performance

Curve
number

Sheath

Impeller

Flow Q
(M³/H)

Flow Q
(L/S)

LIFT
H

Rotation
speed
(r/min)

Maximum
efficiency
η%

Corrosion
allowance
(m)

Blade
number

Impellers
Diameter
(mm)

1¹/₂/1B-DAH

15

M

M

12.6~28.8

3.5~8

6~68

1200~3800

40

2~4

5

152

WPA151B0

1¹/₂/1B-DAH

15

RU

RU

10.8~25.2

3~7

7~52

1400~3400

35

2~4

3

152

WPA151BD2A

1¹/₂/1C-HH

30

M

M

16.2~34.2

4.5~9.5

25~92

1400~2200

20

2~5.5

5

330

WPA151E0

2/1¹/₂B-DAH

15

M

M

32.4~72

9~20

6~58

1200~3200

45

3.5~8

5

184

WPA215B0

2/1¹/₂B-DAH

15

RU

RU

25.2~54

7~15

5.5~41

1000~2600

50

2.5~5

5

178

WPA215B02

3/2C-DAH

30

M

M

39.6~86.4

11~24

12~64

1300~2700

55

4~6

5

214

WPA32A01

3/2C-DAH

30

RU

RU

36~75.6

10~21

13~39

1300~2100

55

2~4

5

213

WPA32A0LA

3/2D-HH

60

M

M

68.4~136.8

19~38

25~87

850~1400

47

3~7.5

5

457

WPA32F01

4/3C-DAH

30

M

M

86.4~198

24~55

9~52

1000~200

71

4~6

5

245

WPA43A0

4/3D-DAH

60

M

M

86.4~198

24~55

9~52

1000~200

71

4~6

5

245

WPA43A0

4/3C-DAH

30

R

R

79.2~180

22~50

5~34.5

800~1800

59

3~5

5

245

WPA43A01A

4/3D-DAH

60

R

R

79.2~180

22~50

5~34.5

800~1800

59

3~5

5

245

WPA43A01A

4/3C-DAH

30

M

M

97.2~194.4

27~54

9~53

1000~2200

55

 

3

240

WPA43A02

4/3D-DAH

60

M

M

97.2~194.4

27~54

9~53

1000~2200

55

 

3

240

WPA43A02

4/3E-HH

120

M

M

126~252

35~70

12~97

600~1400

50

2~5

5

508

WPA43E01

 

MODEL

Maximum
power
allowed

Material

Fresh Water Performance

Curve
number

Sheath

Impeller

Flow Q
(M³/H)

Flow Q
(L/S)

LIFT
H

Rotation
speed
(r/min)

Maximum
efficiency
η%

Corrosion
allowance
(m)

Blade
number

Impellers
Diameter
(mm)

6/4D-HH

60

M

M

162~360

45~100

12~56

800~1550

65

5~8

5

365

WPA64A01

6/4E-DAH

120

M

M

162~360

45~100

12~56

800~1550

65

5~8

5

365

WPA64A01

6/4D-DAH

60

M

M

180~396

50~110

7~6

600~1600

55

3~8

4

372

WPA64A02

6/4E-DAH

120

M

M

180~396

50~110

7~6

600~1600

55

3~8

4

372

WPA64F02

6/4D-DAH

60

RU

RU

144~324

40~90

12~45

800~1350

65

3~5

5

365

WPA64A03A

6/4E-DAH

120

RU

RU

144~324

40~90

12~45

800~1350

65

3~5

5

365

WPA64A03A

6/4D-DAH

60

M

M

144~324

40~90

10~52

800~1600

55

4.5~9

2

371

WPA64A04

6/4E-DAH

120

M

M

144~324

40~90

10~52

800~1600

55

4.5~9

2

371

WPA64A04

6/4D-DAH

60

M

M

162~360

45~100

21~64

1000~1600

55

 

2

371

ESY7996

6/4E-DAH

120

M

M

162~360

45~100

21~64

1000~1600

55

 

2

371

ESY7996

6/4D-DAH

60

M

M

126~288

35~80

10~55

800~1600

58

2~2.5

2

365

ESY7997

6/4E-DAH

120

M

M

126~288

35~80

10~55

800~1600

58

2~2.5

2

365

ESY7997

6/4S-HH

560

M

M

324~720

90~200

30~118

600~1000

64

3~8

5

711

WPA64BDLM

6S-H

560

M

M

468~1008

30~280

20~94

500~1000

65

4~12

5

711

WPA66A9I

8/6E-DAH

120

M

M

360~828

100~230

10~61

500~1140

72

2~9

5

510

WPA86A0

8/6R-DAH

300

M

M

360~828

100~230

10~61

500~1140

72

2~9

5

510

WPA86A0

 

Product Detail

 

Construction and flow path

The Horizontal Centrifugal Slurry Pump receives the slurry through the suction connection. The rotating impeller accelerates the mixture from the impeller eye toward the outer diameter. The casing then collects the moving slurry and converts part of its velocity into pressure before the slurry enters the discharge line.

The wet end is the main wear area. The impeller, casing, liners and other wetted components must be selected according to the abrasive, corrosive and hydraulic characteristics of the medium. A hard-metal configuration may be considered for some abrasive mineral slurries, while a lined configuration may be considered for selected fine-particle duties where temperature and chemical compatibility are suitable. These are configuration options, not fixed specifications for every model.

Shaft sealing and drive

Packing, mechanical seal or another sealing arrangement is selected according to the pump series and process conditions. If seal water, flushing water or external lubrication is required, the pressure and flow conditions must follow the ordered configuration's technical documentation.

The drive may include a motor, coupling and baseplate arrangement or another approved configuration. Motor power, speed, voltage, frequency, protection class and control requirements must be confirmed with the exact model and project duty.

Operating point and maintenance access

A slurry pump should operate within the approved performance range. Operation far from the intended duty point can increase recirculation, vibration, power demand or wear. The horizontal base-mounted arrangement provides access for inspection, alignment checks and replacement of selected wear components, subject to the actual pump design.

product-750-750

 

Features / Equipment Characteristics

 

Horizontal installation for practical maintenance

The horizontal layout keeps the pump, drive and support arrangement accessible for inspection and planned service. It is suitable for process systems where maintenance teams need to check the wet end, coupling and sealing area without removing the complete pump from the line.

Centrifugal transfer for solids-bearing media

The centrifugal hydraulic design is intended for liquid-solid mixtures rather than clean water alone. The actual transfer capability depends on the selected impeller, speed, casing, slurry properties and system resistance.

Wear-part configuration based on the duty

The impeller, casing and liners are exposed to the pumped slurry. Their material and geometry should be selected according to particle size, hardness, concentration, temperature and chemical compatibility. This helps the buyer avoid using a generic material recommendation for an unsuitable slurry.

Clear selection and spare-parts planning

A complete quotation can be built around the duty point, performance curve, outline drawing, material information, sealing arrangement and recommended spares. This gives engineering buyers and distributors a more useful basis for comparing pump configurations.

Service-focused product configuration

The pump configuration can be reviewed together with the drive, base, coupling, seal system, spare parts and project documentation. OEM requirements and nameplate details should be confirmed before production rather than assumed from the product title.

product-750-750

 

Application

 

The Horizontal Centrifugal Slurry Pump can be considered for the following duties when the selected materials and performance curve match the process conditions:

Mining and mineral processing

Mill discharge and slurry transfer

Cyclone feed

Flotation circuit transfer

Concentrate transfer

Tailings transport

Ore slurry circulation

Sand and aggregate processing

Sand slurry transfer

Aggregate washing systems

Sand classification systems

Settling pond transfer

Selected dredging and reclamation duties

Coal preparation and industrial waste handling

Coal slurry transfer

Fines and residue handling

Ash and waste slurry transfer

Abrasive process liquid transfer

Selected corrosive slurry duties with compatible wetted materials

The application should be reviewed from the complete duty data. A similar medium name does not guarantee the same pump selection. Confirm concentration, particle size, hardness, temperature, pH, suction condition and total head for each project.

product-750-750

 

FAQ / Customer Questions

 

Q: What is a Horizontal Centrifugal Slurry Pump used for?

A: A Horizontal Centrifugal Slurry Pump is used to transfer liquid containing abrasive or suspended solids, such as mineral slurry, sand slurry, tailings, concentrate and selected industrial waste streams. The exact application depends on the model, materials and operating conditions.

Q: How do I select the correct model?

A: Provide the required flow rate, total head, slurry specific gravity, solids concentration, particle size, particle hardness, temperature, pH, suction condition, pipeline information and motor power supply. The model should be selected from the actual operating point and approved performance curve.

Q: Can the Horizontal Centrifugal Slurry Pump handle abrasive solids?

A: It is intended for slurry service, but the allowable particle size, concentration and abrasiveness depend on the selected model and wet-end materials. Provide complete slurry information before the configuration is confirmed.

Q: Can it be used for corrosive slurry?

A: It may be suitable for selected corrosive duties when the casing, impeller, liners and sealing arrangement are chemically compatible. Confirm pH, temperature and chemical composition before ordering.

Q: What are the common wear parts?

A: Common wear components may include the impeller, casing or casing liners, frame plate liner, throatbush and other parts defined by the selected pump series. The final spare-parts list must follow the approved drawing and bill of materials.

Q: What information should be included in an inquiry?

A: Include flow rate, total head, slurry name, specific gravity, solids concentration, particle size, temperature, pH or chemical composition, motor voltage and frequency, installation details and expected operating schedule.

Q: Can you supply a complete pump and motor package?

A: A complete package may be available depending on the selected model and project scope. Confirm the motor, coupling, base, control arrangement, seal system, spare parts and required documentation in the inquiry.

Q: How can I reduce slurry pump wear?

A: Use the correct pump size and wet-end material, operate within the approved performance range, avoid dry running, maintain suitable suction conditions and inspect wear parts at planned intervals. Wear life is also affected by solids concentration, particle hardness and operating hours.

 

product-800-798

 

Final Inquiry

 

English CTA: Contact us for a model-specific recommendation for the Horizontal Centrifugal Slurry Pump. Please send your flow rate, total head, slurry properties, particle size, temperature, motor power supply and installation information. We will review the duty point before confirming the pump configuration.

 

 

Hot Tags: horizontal centrifugal slurry pump, China horizontal centrifugal slurry pump manufacturers, suppliers, factory

Send Inquiry