IS Single Stage Water Pump

IS Single Stage Water Pump
Product Introduction:
The IS Single Stage Water Pump serves as an essential mechanical platform across municipal, commercial, and agricultural water transmission networks. Classified under international ISO 2858 standardization norms, this machine utilizes a single centrifugal impeller rotating inside a stationary volute collector to execute uninterrupted, high-efficiency liquid transfer. By confining hydrodynamic acceleration to one discrete impeller passage, the unit generates continuous pressure heads spanning from 15 meters to over 125 meters without relying on cumbersome multistage casing segments or interstage transfer ducts.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of is single stage water pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk is single stage water pump for sale here from our factory. Also, pricelist is available.

 

Operational Durability & Mechanical Maintenance Features

 

Mechanical power transmission versatility further enhances plant integration flexibility. The pump's drive-end shaft extension features a standardized cylindrical keyway, permitting direct flexible coupling to standard 2-pole or 4-pole TEFC induction electric motors (IP55, IE3 high efficiency) or heavy-duty multi-cylinder compression-ignition engines. For off-grid remote installations, agricultural river diversion, or municipal emergency standby dewatering, the pump can be mounted alongside a diesel engine on a common fabricated structural steel skid, complete with flexible pin-bush coupling, protective belt guards, auxiliary fuel day-tank, and 24V electric start instrument panels, delivering autonomous pumping capability independent of regional electrical utility grids.

product-800-800

 

Hydraulic Performance Selection Framework & Impeller Trimming Matrices

 

Performance data below spans three sizing matrices: Operational Index A highlights Full-Diameter Baseline Models with uncut impeller profiles; Operational Index B presents Primary Step-One Impeller Diameter Trims with initial diameter reductions; and Operational Index C details Secondary Deep Energy Optimization Trims. Model designations follow standard sizing notation: in model IS 100-80-160A, 'IS' denotes the single-stage horizontal end-suction clear water standard, '100' indicates a 100 mm suction bore, '80' indicates an 80 mm discharge bore, '160' denotes the 160 mm nominal impeller diameter, and 'A' specifies the first-tier trimmed impeller profile.

Operational Index A: Baseline Full-Diameter Cast Impeller Models (Uncut Series)

Model Designation

Speed (r/min)

Flow Range (m³/h)

Head Range (m)

Peak Eff. (%)

NPSHr (m)

Mating Motor

Inlet / Outlet (mm)

IS 100-80-160

2900

60 - 100 - 120

38 - 32 - 28

78.0

4.0

15 kW

100 / 80

IS 100-65-200

2900

60 - 100 - 120

54 - 50 - 47

76.0

3.6

22 kW

100 / 65

IS 100-65-250

2900

60 - 100 - 120

87 - 70 - 74.5

72.0

3.8

37 kW

100 / 65

IS 125-100-200

2900

120 - 200 - 240

57.5 - 50 - 44.5

81.0

4.5

45 kW

125 / 100

IS 125-100-250

2900

120 - 200 - 240

87 - 80 - 72

78.0

4.2

75 kW

125 / 100

Operational Index B: Primary Step-One Impeller Diameter Trims (Series A)

Model Designation

Speed (r/min)

Flow Range (m³/h)

Head Range (m)

Peak Eff. (%)

NPSHr (m)

Mating Motor

Inlet / Outlet (mm)

IS 100-80-160A

2900

56.1 - 93.5 - 112.2

33.2 - 28 - 24.5

77.5

4.0

11 kW

100 / 80

IS 100-65-200A

2900

56.1 - 93.5 - 112

47.6 - 44 - 41.4

75.5

3.6

18.5 kW

100 / 65

IS 100-65-250A

2900

56.1 - 93.5 - 112

76 - 70 - 65

70.0

3.8

30 kW

100 / 65

IS 125-100-200A

2900

112.5 - 187 - 225

50.5 - 44 - 39

79.0

4.5

37 kW

125 / 100

IS 125-100-250A

2900

112 - 187 - 220

76 - 70 - 63

78.0

4.2

55 kW

125 / 100

Operational Index C: Secondary Deep Energy Optimization Trims (Series B)

Model Designation

Speed (r/min)

Flow Range (m³/h)

Head Range (m)

Peak Eff. (%)

NPSHr (m)

Mating Motor

Inlet / Outlet (mm)

IS 100-80-160B

2900

50 - 83 - 100

28.4 - 22 - 19

76.5

4.0

7.5 kW

100 / 80

IS 100-65-200B

2900

52 - 86.6 - 104

41 - 38 - 35.7

74.0

3.6

15 kW

100 / 65

IS 100-65-250B

2900

47.5 - 79 - 95

65.3 - 60 - 54

66.0

3.8

22 kW

100 / 65

IS 125-100-200B

2900

95 - 158 - 190

42 - 35 - 30.5

75.5

4.5

22 kW

125 / 100

IS 125-100-250B

2900

104 - 173 - 206

65.3 - 60 - 54

78.0

4.2

45 kW

125 / 100

product-800-800

 

Foundry Metallurgy, Resin Sand Molding & CNC Machining Workflows

 

Precision mechanical finishing is carried out on multi-axis CNC horizontal machining centers. Dedicated hydraulic clamping fixtures allow suction and discharge flange faces, casing alignment spigots, wear ring registers, and bearing bracket bores to be finished in a single machining setup. Eliminating part re-clamping eliminates cumulative geometric error, holding bore concentricity and face runout within 0.025 mm. This exact alignment protects mechanical seal faces from eccentric cyclic wobble and maintains uniform radial clearance along the impeller shroud sealing rings.

Before unit assembly, all rotating impellers are mounted on precision ground mandrels and balanced on dual-plane Schenck computerized dynamic balancing equipment per ISO 1940 G2.5 dynamic balancing criteria. Material is corrected via precision milling on non-wetted outer shroud surfaces. By eliminating dynamic unbalance, running vibration at 2900 r/min is held below 2.8 millimeters per second RMS, protecting ball bearings and sealing faces from premature wear. Component fitting is completed in dedicated dust-controlled assembly bays where dial test indicators verify shaft end-float, coupling face runout, and seal spring compression.

product-800-800

 

Engineering Heritage, Custom Skid Packaging & International Export Logistics

 

product-800-306

 

From our manufacturing headquarters in Hebei Province, Hebei Dehuike Pump Industry Co., Ltd. (dhkpump.com) draws on an engineering track record extending beyond three decades in heavy industrial fluid machinery. Our production footprint covers exceeding 6,000 m² of plant space encompassing specialized casting, multi-axis machining, dynamic balancing, and automated test bays, coordinated with a certified domestic network of more than 900 component vendors. This vertical integration allows our engineering staff to supervise quality from initial metallurgical melt to packaged crate shipping.

To guarantee investment security for overseas EPC firms and municipal buyers, every pumping package built in the Dehuike workshops includes an extended 2-year (24-month) factory warranty against fabrication defects and material flaws, excluding customary consumable wear components such as packing rings and O-ring elastomers. This warranty backing is supported by our comprehensive quality verification protocols, including 100% cold hydrostatic pressure testing under 24 bar, dynamic rotor balancing, and automated test loop performance certification.

Custom skid integration represents a key competency of our engineering division. Clients can specify bare-shaft units, baseplate-mounted electric motor packages, or autonomous diesel-driven pumping sets for remote or off-grid sites. Skids feature channel-steel subframes, flexible pin-bush couplings, steel belt guards, suction strainers, discharge non-return check valves and dual pressure dials, and optional automated PLC variable-frequency control cabinets, fully assembled and test-run before dispatch.

Our global export footprint spans over 50 destination nations across the Americas, Europe, Africa, the Middle East, and Southeast Asia. Manufacturing and quality controls strictly comply with ISO 9001 quality management, EAC conformity, and RoHS environmental standards. Units are packed in ISPM-15 compliant timber crates with internal VCI vapor-corrosion inhibitor film and desiccant packs.

 

Industrial Field Deployments & Real-World Engineering Case Scenarios

 

The robust mechanical build and hydraulic consistency of the IS Single Stage Water Pump allow it to fulfill challenging service across water utilities, petrochemical facilities, thermal power plants, and primary extraction infrastructure. The following four operational installations demonstrate how this pump resolves critical field challenges.

Chemical Fertilizer Plant Off-Site Neutralization Loop: A Middle Eastern nitrogen fertilizer manufacturing complex operates tall gas scrubbers demanding continuous circulation of neutralized clear water to scrub acidic process vapors. Ambient ambient temperatures often exceed 48 deg C, with pumps operating non-stop against an 80-meter static head. The plant commissioned four baseplate-mounted IS 100-65-250 pumping sets (three online, one standby), each delivering 100 m³/h at 70 meters head driven by 30 kW flameproof electric motors. With balanced silicon carbide cartridge seals and high-temperature elastomers, these units provide continuous spray nozzle pressure, preserving emissions compliance without unplanned seal weeping.

Thermal Power Utility Auxiliary Condenser Circulation: In Central Asia, a 600 MW gas turbine power plant required reliable auxiliary pumping to cycle cooling water from an external reservoir to turbine lubrication coolers and secondary heat exchangers. Because cooling interruptions prompt automated turbine trips, continuous S1 run reliability was critical. Three heavy-duty IS 125-100-250 pump skids were installed, each discharging 200 m³/h against 80 meters head via 75 kW enclosed electric motors. Fitted with oil-lubricated bearing housings and external seal flush bypass lines, the pumps have accumulated over 18,000 run hours without unscheduled shutdowns.

Remote Open-Pit Washplant Water Supply: In sub-Saharan Africa, an open-pit mineral washing facility located 15 kilometers from utility power lines required bulk water lifting from a river lagoon into a washplant tank against 50 meters dynamic head. The plant installed six diesel-driven IS 125-100-200 pump packages on channel-iron skids. Connected to 4-cylinder diesel engines through flexible couplings, each skid delivers 200 m³/h of clear water. Equipped with graphite gland packing and grease-packed bearing brackets, the machines run autonomously off-grid, maintained easily with basic field tools.

 

news-800-798

 

 

Hot Tags: is single stage water pump, China is single stage water pump manufacturers, suppliers, factory

Send Inquiry