Vertical Sump Slurry Pump

Vertical Sump Slurry Pump
Product Introduction:
The Vertical Sump Slurry Pump is a heavy-duty, vertical cantilever centrifugal slurry pump designed specifically for handling abrasive, high-density, coarse-particulate slurries from wet sumps, effluent pits, collection basins, and underground drainage trenches.
Send Inquiry
Description
Technical Parameters

Hebei Dehuike Pump Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of vertical sump slurry pump in China. With abundant experience, we are committed to providing high quality customized pumps with competitive price. Welcome to wholesale bulk vertical sump slurry pump for sale here from our factory. Also, pricelist is available.

 

Introduction

 

The Vertical Sump Slurry Pump is a heavy-duty, vertical cantilever centrifugal slurry pump designed specifically for handling abrasive, high-density, coarse-particulate slurries from wet sumps, effluent pits, collection basins, and underground drainage trenches. Built to resolve the chronic maintenance liabilities of submersible pumps and horizontal end-suction installations, this Vertical Sump Slurry Pump requires zero submerged shaft seals or gland packing.
- Core Structural Configuration & Operating Philosophy:
• True Cantilever Architecture: The pump shaft is fully suspended from a rigid overhead bearing assembly located above the sump mounting plate. Zero bearings, mechanical seals, or dynamic elastomers operate below the liquid surface, eliminating the risk of water ingress and abrasive seal destruction entirely.
- Continuous Dry-Running & Snore-Condition Capability:
• Sump drainage often involves erratic inflow, leading to cyclic air-slurry intake. The Vertical Sump Slurry Pump thrives under snoring conditions where fluid level drops to the suction strainer. The open-vane impeller continues spinning without overheating, cavitating uncontrollably, or damaging pump internals.
- Industry Leadership & Manufacturing Lineage:
• Manufactured by Hebei Dehuike Pump Industry Co., Ltd. (DHK Pump) with over 30 years of dedicated slurry pump engineering experience across our 6,000+ m² facility. Designed for modular integration, supporting variable submerged column lengths from 0.9 m to 2.4 m (expandable to 3.5 m with suction pipes).

product-800-800

 

Specifications / Technical Parameters

 

The engineering performance envelope of the Vertical Sump Slurry Pump covers severe-duty industrial drainage applications across mining, coal preparation, mineral dressing, and power generation. Standard models feature high-chromium alloy (A05) wet ends, with synthetic elastomer (R55) options available for acid-corrosive chemical sumps.

- Overall Technical Performance Envelope:

• Flow Rate Capacity: 15 m³/h to 1,800 m³/h (66 GPM to 7,925 GPM)

• Total Dynamic Head (TDH): 4.5 m to 42 m (14.8 ft to 137.8 ft)

• Discharge Diameter Spectrum: 40 mm to 300 mm (1.5-inch to 12-inch flanged discharge)

• Operating Temperature: Standard A05 metallurgy ≤80°C; High-temp alloy ≤110°C; Elastomer R55 ≤65°C

• Max Permissible Solid Particle Size: 15 mm to 65 mm spherical solids passage

- Standard Heavy-Duty SP Sump Slurry Pump Model Sizing Matrix:

product-800-800

 

Type

Flow
m³/h

Head
(m)

Speed
r/min

Eff
η (%)

Shaft power
P (kW)

Mating motor
Power
(kW)

Inlet
(mm)
Outlet
(mm)

40PV-SP(R)

7.56-39.24

4-20.5

1000-2200

30-38

0.38-6.7

1.1-7.5

81 40

65QV-SP(R)

19.08-88.2

5.4-22.5

700-1300

40-51

0.88-8.5

2.2-15

104 65

100RV-SP(R)

41.4-367.2

5-35.8

500-1200

40-56

1.8-37.7

3-45

175 100

150SV-SP(R)

118.8-367.2

8-13.4

500-650

45-53

6.4-21.5

11-37

  150

200SV-SP(R)

183.6-720

7.5-34.5

400-850

50-64

8.2-106

11-185

  200

250TV-SP(R)

450-1188

11.2-31

500-740

60

28.7-134

45-200

  250

300TV-SP(R)

385.2-1492

5.5-31

350-700

50

16.4-179.8

30-250

  300

 

Product Detail

 

A detailed engineering inspection of the Vertical Sump Slurry Pump reveals high-integrity component design optimized for long, unmonitored wet-pit operating intervals:
- Double-Suction Open Impeller (High-Chrome White Iron A05):
Cast from ASTM A532 Class III Type A (27% Cr, hardness 58-62 HRC), the impeller features a double-suction open-vane geometry. Slurry enters simultaneously from top and bottom casing inlets, naturally balancing axial thrust and eliminating the need for delicate balance holes or back pump-out vanes.
- Heavy-Duty Overhead Bearing Cartridge & Oil/Grease Labyrinth:
The robust bearing housing accommodates high-capacity spherical roller bearings to absorb residual radial vibration and high-load angular contact thrust bearings to carry vertical shock loads. The housing is completely isolated by multi-stage grease-purged labyrinth rings, preventing caustic fumes and coal dust from entering the bearing cavity.
- High-Rigidity 40Cr Alloy Cantilever Drive Shaft:
Forged from normalized 40Cr structural alloy steel, the shaft features a massive diameter with heavy taper transitions, minimizing deflection to less than 0.03 mm at the impeller overhang. Every shaft is verified by 100% ultrasonic flaw detection to certify zero metallurgical inclusions.
- Heavy Structural Support Column & Protective Strainer Assembly:
The vertical column consists of heavy seamless structural steel pipe with precision-drilled flanges. Suction openings are guarded by removable, heavy polyurethane or steel perforated strainers to screen out oversized rocks, tramp iron, and debris.

product-800-800

 

Features / Equipment Characteristics

 

The engineering characteristics of the Vertical Sump Slurry Pump deliver distinct performance advantages over standard horizontal slurry pumps and conventional submersible units:
- 100% Elimination of Submerged Seals and Bearing Failures:
By positioning the entire bearing assembly and drive transmission above the sump mounting plate, the pump completely eradicates submerged mechanical seal failures, oil leaks, and flooded stator disasters, drastically lowering plant downtime.
- Self-Balancing Hydraulics with Low NPSH Requirements:
The double-suction intake configuration reduces suction inlet fluid velocity by half compared to single-intake impellers. This yields exceptional Net Positive Suction Head (NPSH) margins, preventing cavitation erosion even in shallow, low-level effluent sumps.
- Rapid Installation on Standardized or Custom Civil Basins:
The rigid mounting baseplate is easily seated onto existing sump hatches, concrete pits, steel grating structures, or floating pontoons without requiring complex pit modifications or pit-floor anchoring bolts.
- 24-Month Factory Warranty Backed by 30+ Years of Manufacturing:
Manufactured strictly under ISO 9001 certified quality controls, every pump unit includes an institutional 24-month (2-year) complete factory warranty (wear parts excluded), providing global mining EPC contractors with institutional procurement security.

product-800-800

 

Application

 

The heavy-duty construction of our Vertical Sump Slurry Pump makes it the standard specification for demanding wet-pit drainage and solids evacuation across harsh global industries:
- Mineral Processing & Concentrator Plants (Copper, Gold, Iron, Lithium):
Deployed inside mill floor spillage trenches, ball mill discharge sumps, cyclone overflow pits, and flotation cell wash-down basins to reclaim dense, high-grade abrasive ore slurries and process floor overflow.
- Coal Preparation Plants & Heavy Media Washeries:
Installed in magnetite recovery sumps, raw coal dewatering pits, thickener underflow floor drainage, and wash-plant effluent trenches containing high concentrations of abrasive coal fines and quartz shale.
- Thermal Power Stations & Flue Gas Desulfurization (FGD):
Pumping wet bottom ash, slag grinding pit slurry, coal handling yard runoff, and limestone slurry drain pits where hot, abrasive, and mildly corrosive liquids destroy conventional drainage pumps.
- Iron & Steel Metallurgy Mills:
Continuous handling of blast furnace slag granulation water, continuous casting scale pits, and hot rolling mill scale collection trenches laden with heavy, sharp iron oxide scale flakes.
- Aggregate Sand Washing & Silica Processing Facilities:
Pumping settled sand mud and washed fines from classification settling lagoons, aggregate washing pits, and dredging wastewater recovery basins.
product-800-800

 

FAQ

 

To assist consulting engineers, plant operators, and EPC procurement specialists during equipment selection, we address the most frequent technical inquiries regarding the Vertical Sump Slurry Pump:

Q1: Can the Vertical Sump Slurry Pump run continuously when the sump is dry or liquid supply is intermittent?

A1: Yes, absolutely. Because the pump has zero submerged mechanical seals, packing rings, or lower bearings that rely on fluid lubrication or cooling, it operates indefinitely in 'snore condition' (drawing air and intermittent fluid) without thermal distress or dry-running damage.

Q2: How is the maximum permissible submerged depth determined, and can suction extension pipes be added?

A2: Standard column lengths range from 0.9 m to 2.4 m based on critical cantilever shaft harmonics. To drain deeper sumps, an additional suction extension pipe up to 1.0 m to 1.5 m can be bolted to the lower suction strainer, allowing total drawdown depths up to 3.5 m without adding lower submerged bearings.

Q3: When should High-Chrome White Iron (A05) be selected over Synthetic Elastomer (R55) lining?

A3: High-Chrome A05 (27% Cr, 58-62 HRC) is recommended for coarse, sharp solids with high impact velocities. Rubber R55 is optimal for fine-particle slurries (d50 < 0.2 mm) and highly acidic chemical liquors (pH 2-12) where chemical corrosion accelerates metallic wear.

Q4: What is the recommended bearing lubrication and preventive maintenance interval?

A4: The overhead bearing assembly uses high-temperature EP2 lithium-complex grease. Regreasing is recommended every 1,500 to 2,000 running hours via standard zerk fittings. Because the bearings are located above the sump deck, lubrication and vibration checks take place safely while the pump is running.

Q5: How do we initiate an engineering quotation and verify civil sump compatibility?

A5: Simply submit your required Flow (m³/h), Head (m), Sump Pit Depth (m), and Slurry Specific Gravity directly to our engineering desk at director@dhkpump.com (WhatsApp: +86 19503223662). Our technical team returns dimensional GA drawings, motor power calculations, and formal commercial proposals within 2 hours.

 

news-800-798

 

Hot Tags: vertical sump slurry pump, China vertical sump slurry pump manufacturers, suppliers, factory

Send Inquiry