Gravel Pump Models And Parameters

Sep 16, 2026

Leave a message

The primary series of gravel pumps include the G type, GH type (high-head), and the SG series. G/GH-type gravel pumps are based on imported technology; they feature a single-casing design connected by a clamp and are classified as single-stage, single-suction, cantilevered centrifugal pumps. The SG series also utilizes a single-stage, single-suction, cantilevered, horizontal design, with the pump casing and cover joined by a clamp. These pumps are designed for transporting highly abrasive materials containing particles too large for standard slurry pumps to handle.
Gravel pump model designations follow a specific convention. Taking "6/4D-G" as an example: "6" represents the pump inlet diameter (in inches), "4" represents the outlet diameter (in inches), "D" denotes the bearing assembly (frame) type, "G" indicates the basic gravel pump model, and "GH" signifies a high-head gravel pump. Common models include 6/4D-G, 8/6E-G, 10/8S-GH, 12/10G-G, 14/12G-G, and 16/14G-G.
The bearing assembly (frame) type is a key identifier within the model designation; common types include B, C, D, E, F, G, and ST.
Typical operating parameters for gravel pumps include: a flow rate range of 36–5040 m³/h, a head range of 5–80 m, a power rating of 60–1200 kW, and rotational speeds including 720, 990, 1480, and 2960 r/min.

Send Inquiry