1. Ensure that the pump's mounting foundation is secure and that the inlet and outlet piping are firmly supported to prevent vibration or displacement during operation.
2. Verify that the pump's direction of rotation is correct; the impeller must rotate in the specified direction to avoid damage to the pump or backflow of the pumped material.
3. Before starting the pump, ensure it is fully primed-filled completely with liquid-to prevent dry running, which could damage the mechanical seal.
4. Regularly monitor the pump's condition during operation. If any abnormal noise, vibration, or leakage is detected, shut down the pump immediately to investigate and resolve the issue.
5. If the pump has been idle for an extended period, ensure it is fully primed before operation. Additionally, keep the inlet and outlet valves closed when the pump is not in use to prevent the slurry inside from crystallizing, which could lead to clogging or damage.
